1.1 本试验方法包括在试验条件下测定水分和其他挥发性物质。适用于磺化、硫酸化油、脂肪、油、加脂剂和软化化合物。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 本试验方法旨在测定磺化、硫酸化油、脂肪、油、加脂剂和软化化合物的水分和挥发物含量。

1.1 This test method covers the determination of moisture and other volatile material under conditions of the test. It is applicable to sulfonated, sulfated oils, fats, oils, fatliquors, and softening compounds. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This test method is intended to determine the moisture and volatile content of sulfonated, sulfated oil, fats, oils, fatliquors, and softening compounds.