BS EN 998-1:2016适用于基于无机材料的工厂制抹灰/抹灰砂浆 墙、天花板、柱子和隔墙上使用的外部（抹灰）和内部（抹灰）粘合剂。它包含定义和最终性能要求。本欧洲标准规定了性能恒定性的评估和验证 （AVCP）的产品符合本欧洲标准。本协议所涵盖产品的标记要求 包括本欧洲标准。它不包括以硫酸钙粘合剂为主要活性粘合剂的砂浆。硫酸钙粘合剂可与空气石灰一起用作附加粘合剂。如果空气石灰是 主要活性粘合成分，抹灰/抹灰砂浆包含在本规范中 标准如果硫酸钙粘合剂是主要的活性粘合成分，则砂浆 包含在EN 13279中。 特殊耐火和隔音砂浆，结构修复和表面处理用砂浆 建筑元素，如平滑或修整材料、油漆、涂料、薄层有机材料 本欧洲标准不涉及抹灰/石膏和预制构件（如石膏板） 标准本欧洲标准涵盖第3条中定义的抹灰/抹灰砂浆，但以下情况除外: 现场抹灰/抹灰砂浆。但是，本欧洲标准或本欧洲标准的一部分 本标准可与适用规范和覆盖现场的国家规范结合使用 灰浆交叉引用:EN 1015-2EN 1015-7EN 1015-9EN 1015-10EN 1015-11EN 1015-12EN 1015-18EN 1015-19EN 1015-21EN 1745:2012EN 13501-1EN 1015-1EN 1015-6EN 13279FprCEN/TR 168862003/424/ECEN ISO 9001购买本文件时提供的所有当前修订版。

BS EN 998-1:2016 is applicable to factory-made rendering/plastering mortars based on inorganic binders for external (rendering) and internal (plastering) use on walls, ceilings, columns and partitions.It contains definitions and final performance requirements.This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.It does not cover mortars where calcium sulphate binder is the principal active binding agent.Calcium sulphate binder can be used as an additional binder together with air lime. If air lime is the principal active binding component, the rendering/plastering mortar is covered by this European Standard. If the calcium sulphate binder is the principal active binding component, the mortar is covered by EN 13279.Special fire resistant- and acoustical mortars, mortars for structural repair and surface treatments of building elements such as materials for smoothing or trueing, paints, coatings, thin-layer organic renders/plasters and prefabricated units (e.g. plasterboards) are not dealt with in this European Standard.This European Standard covers rendering/plastering mortars defined in Clause 3 with the exception of site-made rendering/plastering mortars. However, this European Standard or part of this European Standard may be used in conjunction with codes of application and national specifications covering sitemade mortar.Cross References:EN 1015-2EN 1015-7EN 1015-9EN 1015-10EN 1015-11EN 1015-12EN 1015-18EN 1015-19EN 1015-21EN 1745:2012EN 13501-1EN 1015-1EN 1015-6EN 13279FprCEN/TR 168862003/424/ECEN ISO 9001ISO 9001All current amendments available at time of purchase are included with the purchase of this document.