警告1-使用本文件的人员应熟悉正常的实验室实践。 本文件并非旨在解决与其相关的所有安全问题（如有） 使用用户有责任建立适当的安全和健康实践，并 确定任何其他限制的适用性。 警告2-本文件中规定的某些程序可能涉及使用或生成 可能构成当地环境危害的物质或废物的产生。 使用后，应参考有关安全处理和处置的适当文件。本文件规定了测定锌的原子吸收光谱法 橡胶含量。 该方法适用于锌含量至少为0.05%（质量分数）的生橡胶和橡胶制品。 如果对试验部分的质量和/或所用溶液的浓度进行适当调整，则可确定低于该限值的锌含量。使用标准加入法可能会降低检测下限。交叉引用:ISO 123ISO 1772ISO 1042ISO 4793ISO 648ISO 247-1ISO 124ISO 1795ISO/TR 9272ISO 19983购买本文件时提供的所有当前修订版均包含在购买本文件中。

WARNING 1 — Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions. WARNING 2 — Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.This document specifies an atomic absorption spectrometric method for the determination of the zinc content of rubbers. The method is applicable to raw rubber and rubber products having zinc contents at a minimum of 0,05 % (mass fraction). Zinc contents below this limit can be determined, provided that suitable adjustments are made to the mass of the test portion and/or to the concentrations of the solutions used. The use of the standard additions method might lower the bottom limit of detection.Cross References:ISO 123ISO 1772ISO 1042ISO 4793ISO 648ISO 247-1ISO 124ISO 1795ISO/TR 9272ISO 19983All current amendments available at time of purchase are included with the purchase of this document.