前言:这是CAN/CSA-C60888《绞合导线用镀锌钢丝》的第一版，采用了标题相同的CEI/IEC（国际电工委员会/国际电工委员会）标准888（第一版，1987-12），但有加拿大的偏差。本标准由加拿大航空航天局间接费用技术委员会审查，以供加拿大采用 电力工程战略指导委员会管辖下的电导体 和电磁兼容性，并已由技术委员会正式批准。技术委员会成员名单可根据要求提供。本标准已被加拿大标准委员会批准为加拿大国家标准。范围:本标准适用于架空输电导线施工和/或加固中使用的镀锌钢丝。 其目的是覆盖所有结构中使用的电线，其中单个电线直径（包括涂层）在1.25 mm至5.50 mm范围内。包括三个等级的钢，以反映导体用户的需求:普通钢、高强度钢和超高强度钢。每单位面积的最小锌质量代表两类涂层:1类和2类

Preface:This is the first edition of CAN/CSA-C60888,Zinc-coated steel wires for stranded conductors, which is an adoption, with Canadian deviations, of the identically titled CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) Standard 888 (first edition, 1987-12).This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Overhead Electrical Conductors, under the jurisdiction of the Strategic Steering Committee on Power Engineering and Electromagnetic Compatibility, and has been formally approved by the Technical Committee. A list of the members of the Technical Committee is available upon request. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.Scope:This Standard applies to zinc-coated steel wires used in the construction and/or reinforcement of conductors for overhead power transmission purposes.It is intended to cover all wires used in constructions where the individual wire diameters, including coating, are in the range of 1.25 mm to 5.50 mm.Three grades of steel are included to reflect the needs of conductor users: regular steel, high strength steel and extra high strength steel.Two classes of coating are represented by minimum zinc mass per unit area are included: Class 1 and Class 2