现行

MIL MIL-G-50935B Notice 1-Validation

GRENADES, GP, CONE FOR (SUPERSEDING MIL-G-50935A)
GREENDES GP CONE FOR（取代MIL-G-50935A）

1988-03-18

现行

MIL MS51040A Notice 1-Validation

SETSCREW-HEXAGON SOCKET, CONE POINT, BRASS, BLACK OXIDE, UNF-3A (SUPERSEDING MS51040)
SETSCREW-HEXAGON插座 CONE点 黄铜 黑色氧化物 UNF-3A（取代MS51040）

1988-05-20

现行

GB/T 11334-2005

产品几何量技术规范（GPS） 圆锥公差
Geometrical Product Specifications(GPS)Cone tolerance

2005-05-16

现行

DIN 7178-1

System of cone tolerances and cone fits for conical workpieces from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone tolerances
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；圆锥公差系统

1974-12-01

现行

UNE 16325-1-1982

TRUNCATED CONE ABRASIVE SLEEVES. DESIGNATION. DIMENSIONS. TOLERANCES.
截锥研磨套筒 任命尺寸 公差

1982-03-15

现行

UNE 16325-2-1982

TRUNCATED CONE ABRASIVE SLEEVES. DESIGNATION. DIMENSIONS. TOLERANCES.
截锥研磨套筒 任命尺寸 公差

1982-03-15

现行

DIN 7178-3

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; effect of the deviations on cone with regard to the cone fit
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；锥面配合偏差对锥面的影响

1986-08-01

现行

DIN 7178-2

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone fits
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；锥形配合系统

1986-08-01

现行

UNE 40206-2003

Textile machinery. Cones for cross winding. Dimensions, tolerances and designation of cones with half angle 3 grades 30 minutes.
纺织机械 用于交叉缠绕的圆锥体 半角锥的尺寸、公差和名称3级30分钟

2003-10-17

现行

GB/T 20035.2-2005

纺织机械与附件 交叉卷绕用圆锥形筒管 第2部分：半锥角3°30′圆锥形筒管的尺寸、公差和标记
Textile machinery and accessories -- Cones for cross winding -- Part2: Dimensions,tolerances and designation of cones with half angle 3°30′

2005-10-19

现行

UNE 40071-2003

Textile machinery and accesories. Cones for cross winding. Dimensions, tolerances and designation of cones with half angle 4 grades 20 minutes.
纺织机械及配件 用于交叉缠绕的圆锥体 半角锥的尺寸、公差和名称4级20分钟

2003-10-17

现行

GB/T 20035.3-2005

纺织机械与附件 交叉卷绕用圆锥形筒管 第3部分：半锥角4°20′圆锥形筒管的尺寸、公差和标记
Textile machinery and accessories -- Cones for cross winding -- Part 3: Dimensions,tolerances and designation of cones with half angle 4°20′

2005-10-19

现行

UNE 40272-2003

Textile machinery and accesories. Cones for cross winding. Dimensions, tolerances and designation of cones with half angle 5 grades 57 minutes.
纺织机械及配件 用于交叉缠绕的圆锥体 半角锥的尺寸、公差和名称5级57分钟

2003-10-24

现行

GB/T 20035.5-2005

纺织机械与附件 交叉卷绕用圆锥形筒管 第5部分：半锥角5°57′圆锥形筒管的尺寸、公差和标记
Textile machinery and accessories -- Cones for cross winding -- Part 5: Dimensions,tolerances and designation of cones with half angle 5°57′

2005-10-19

现行

DIN 7178-4

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; axial displacements
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；轴向位移

1986-08-01

现行

GB/T 20035.4-2005

纺织机械与附件 交叉卷绕用圆锥形筒管 第4部分：半锥角4°20′染色用圆锥形筒管的尺寸、公差和标记
Textile machinery and accessories -- Cones for cross winding -- Part 4: Dimensions,tolerances and designation of cones with half angle 4°20′for winding for dyeing purposes

2005-10-19

现行

UNE 40062-2003

Textile machinery and accessories. Cones for cross winding. Dimensions, tolerances and designation of cones with half angle 4 grades 20 minutes for winding for dyeing purposes.
纺织机械及配件 用于交叉缠绕的圆锥体 染色用卷绕用4级20分钟半角锥体的尺寸、公差和名称

2003-10-03

现行

DIN 7178-5

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; vocabulary in German, English, French, Italian, Russian, Spanish
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；德语、英语、法语、意大利语、俄语、西班牙语的词汇

1976-02-01

现行

DIN ISO 8489-3

Textile machinery and accessories - Cones for cross winding - Part 3: Dimensions, tolerances and designation of cones with half angle 4° 20 (ISO 8489-3:1995)
纺织机械和附件交叉卷绕用圆锥体第3部分:半角为4°20°的圆锥体的尺寸、公差和名称（ISO 8489-3-1995）

1997-05-01

现行

DIN ISO 8489-5

Textile machinery and accessories - Cones for cross winding - Part 5: Dimensions, tolerances and designation of cones with half angle 5° 57 (ISO 8489-5:1995)
纺织机械和附件交叉卷绕用圆锥体第5部分:半角为5°57°的圆锥体的尺寸、公差和名称（ISO 8489-5-1995）

1997-05-01