KS B ISO 13564-1-2015(2020)-动力工业卡车 - 验证可视性的测试方法 - 第1部分:直立和包含10吨容量的坐式和独立操作员卡车和可变牵引卡车-国家数字标准馆

现行 KS B ISO 13564-1-2015(2020)

到馆提醒

收藏跟踪

购买正版

산업용 동력트럭 — 시야성 확보를 위한 시험방법 — 제1부: 좌승식 및 입승식 트럭과 10 t 용량 이하의 가변 리치 트럭 动力工业卡车 - 验证可视性的测试方法 - 第1部分:直立和包含10吨容量的坐式和独立操作员卡车和可变牵引卡车

发布日期： 2015-07-29

该标准明确了额定容量在10000kg以下的自主式工业卡车和有坐式或入式驾驶员、无负荷状态的、KS B ISO 5053中定义的、装有福克岩或装载装置的工业可变里奇卡车的整体视野性要求及试验程序。这不适用于以下情况。低上横梁托架（定义为KS B ISO 5053，3.1.3.2.3）——高升力横梁托架（定义为KS B ISO 5053，3.1.3.1.11）——驾驶员位置上升时，驾驶员位置上升的卡车——额定容量超过10000kg的卡车——试验用可变富力卡车——集装箱装卸卡车——侧装载机

이 표준은 정격 용량이 10 000 kg 이하인 자주식 산업용 트럭 그리고 좌승식 또는 입승식 조종사가 있고, 무부하 상태의, KS B ISO 5053에 정의된 포크 암 또는 적재장치가 장착된 산업용 가변 리치 트럭의 전반적인 시야성에 관한 요구사항 및 시험 절차를 명시한다.이것은 다음에는 적용되지 않는다.― 저상 스트래들 캐리어(KS B ISO 5053, 3.1.3.2.3에 정의)― 하이 리프트 스트래들 캐리어(KS B ISO 5053, 3.1.3.1.11에 정의)― 조종사 위치가 상승 시, 조종사 위치가 상승하는 트럭― 정격 용량이 10 000 kg을 초과하는 트럭― 험지용 가변 리치 트럭― 컨테이너 하역 트럭― 사이드 로더

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 53.060材料储运设备 - 工业车辆

关联关系

研制信息

相似标准/计划/法规

BS EN 16842-1-2018

Powered industrial trucks. Visibility. Test methods and verification-General requirements
动力工业卡车可见度测试方法和验证一般要求

Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
动力工业卡车.可见度.试验方法和验证.第1部分:一般要求

BS EN 16842-5-2021

Powered industrial trucks. Visibility. Test methods and verification-Industrial variable-reach trucks greater than 10 000 kg capacity
动力工业卡车可见度测试方法和验证

BS EN 16842-4-2019

Powered industrial trucks. Visibility. Test methods and verification-Industrial variable reach trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证

BS EN 16842-3-2018

Powered industrial trucks. Visibility. Test methods and verification-Reach trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证载重不超过10000 kg（含10000 kg）的大型卡车

BS EN 16842-10-2020

Powered industrial trucks. Visibility. Test methods and verification-Towing and Pushing tractors and Burden carrier
动力工业卡车可见度测试方法和验证

Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity
机动工业卡车.可见度.试验方法和验证.第5部分:容量大于10000 kg的工业可变范围卡车；德文版EN 16842-5:2021

BS EN 16842-9-2019

Powered industrial trucks. Visibility. Test methods and verification-Order-picking, lateral- and front-stacking trucks with elevating operator position
动力工业卡车可见度测试方法和验证

BS EN 16842-8-2021

Powered industrial trucks. Visibility-Test methods and verification-Stand-on counterbalance trucks up to and including 10 000 kg capacity
动力工业卡车能见度测试方法与验证

Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
动力工业卡车.可见度.试验方法和验证.第4部分:10000 kg及以下的工业可变范围卡车

BS ISO 13564-1-2012

Powered industrial trucks. Test methods for verification of visibility-Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
动力工业卡车可见度检验的试验方法

Powered industrial trucks - Visibility - Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity
机动工业卡车.可见度.试验方法和验证.第8部分:10000 kg及以下的立式平衡卡车；德文版EN 16842-8:2021

DIN EN 16842-10

Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
机动工业卡车.可见度.试验方法和验证.第10部分:牵引和推动拖拉机及装载机；德文版EN 16842-10:2020

BS EN 16842-2-2018

Powered industrial trucks. Visibility. Test methods and verification-Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证坐在平衡重卡车和不平地面桅杆卡车上容量不超过10000 kg

BS EN 16842-6-2018

Powered industrial trucks. Visibility. Test methods and verification-Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
动力工业卡车可见度测试方法和验证坐在载重能力大于10000 kg的平衡重卡车和崎岖不平的地面桅杆卡车上

GB/T 32272.1-2015

机动工业车辆验证视野的试验方法第1部分：起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车
Powered industrial trucks—Test methods for verification of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity

ISO 13564-1-2012

Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
动力工业卡车——可视性验证的试验方法第1部分:坐式和站式操作卡车和10t及以下的可变范围卡车

Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
动力工业卡车.可见度.试验方法和验证.第2部分:10000 kg及以下的坐式平衡卡车和崎岖地形桅杆卡车

BS EN 16842-7-2018

Powered industrial trucks. Visibility. Test methods and verification-Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
动力工业卡车可见度测试方法和验证用于装卸6米（20英尺）长及更长货物集装箱的可变伸缩和桅杆式集装箱卡车

KS B ISO 22915-10(2020 Confirm)

산업용 트럭－안정도 검사－제10부：동력식 측면 스태킹의 특수 조건에서 트럭 작동에 대한 추가안정도 시험
工业货车稳定性验证第10部分:在动力装置横向移动负载的情况下在特殊条件下操作的货车的附加稳定性试验

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统