1.1本规范涵盖非合金钼和钼合金板材、薄板、带材和箔材，如下所示: 1.1.1钼360非合金真空电弧铸造钼。 1.1.2钼361非合金粉末冶金钼。 1.1.3钼合金363真空电弧铸造钼-0.5%钛-0.1%锆（TZM）合金。 1.1.4钼合金364粉末冶金钼-0.5%钛-0.1%锆（TZM）合金。 1.1.5钼365非合金真空电弧铸造钼，低碳。 1.1.6钼合金366真空电弧铸造钼-30%钨合金。 1.1.7图纸等级定义了图纸等级，买方可将其规定为单独的要求。 1.2以英寸-磅为单位的数值应视为标准值。

1.1 This specification covers unalloyed molybdenum and molybdenum alloy plate, sheet, strip, and foil as follows: 1.1.1 Molybdenum 360 Unalloyed vacuum arc-cast molybdenum. 1.1.2 Molybdenum 361 Unalloyed powder metallurgy molybdenum. 1.1.3 Molybdenum Alloy 363Vacuum arc-cast molybdenum-0.5 % titanium-0.1 % zirconium (TZM) alloy. 1.1.4 Molybdenum Alloy 364Powder metallurgy molybdenum-0.5 % titanium-0.1 % zirconium (TZM) alloy. 1.1.5 Molybdenum 365 Unalloyed vacuum arc-cast molybdenum, low carbon. 1.1.6 Molybdenum Alloy 366Vacuum arc-cast molybdenum-30 % tungsten alloy. 1.1.7 Drawing Grade A drawing grade is defined, which may be specified as a separate requirement by the purchaser. 1.2 The values stated in inch-pound units are to be regarded as the standard.