Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
电绝缘液体中腐蚀性硫的标准试验方法

2024-01-15

电气绝缘油中腐蚀性硫的试验法
Standard test method for corrosive sulfur in electrical insulating oils

2011-01-10

Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
绝缘材料 - 绝缘材料引起的电解腐蚀的测定 - 试验方法

2007-01-29

电气绝缘材料 测定因绝缘材料引起的电解腐蚀的试验方法
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials-test methods

2008-12-31

Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
电绝缘材料 绝缘材料引起的电解腐蚀的测定 测试方法

2007-03-30

Methods of test for petroleum and its products-Petroleum products. Electrical insulating oils. Detection of corrosive sulfur
石油及其产品的试验方法 石油产品 电气绝缘油 腐蚀性硫的检测

2009-07-31

Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007); German version EN 60426:2007
电气绝缘材料.绝缘材料引起的电解腐蚀的测定.试验方法（IEC 60426-2007）；德文版EN 60426:2007

2007-11-01

Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
电缆 额定电压为3.8/6.6 kV至19/33 kV的热固性绝缘铠装电缆 受火灾影响时烟雾和腐蚀性气体排放量低 要求和试验方法

2008-08-29

电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23℃ - DC resistivity at 23℃ and 100℃

2008-06-26

전기 케이블 및 광 케이블의 절연체 및 시스 재료 — 공통 시험방법 —제5-1부: 충전용 화합물의 시험방법 —적하점 — 기름 분리 — 저온에서 부서짐— 총산가 — 부식성 — 23 ℃에서의 유전율— 23 ℃ 및 100 ℃에서의 직류 저항률
电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充化合物专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀成分.23℃下的介电常数.23℃和100℃下的直流电阻率

2021-10-21

INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 5-1: METHODS SPECIFIC TO FILLING COMPOUNDS. DROPT POINT. SEPARATION OF OIL. LOW TEMPERATURE BRITTLENESS. TOTAL ACID NUMBER. ABSENCE OF CORROSIVE COMPONENTS. PERMITTIVITY AT 23 ºC. DC RESISTIVITY AT 23 ºC AND
电缆和光缆的绝缘和护套材料 常见的测试方法 第5-1部分:填充化合物的特定方法 下降点 分离油 低温脆性 总酸值 无腐蚀性成分 23℃时的介电常数 23℃时的直流电阻率和

1999-09-22

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C (IEC 60811-5-1:1990, modified + A1:2003); German version EN 60811-5-1:1999 + A1:2004
电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充化合物专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀成分.23°C下的介电常数.直流电阻率

2004-12-01