Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
电绝缘液体中腐蚀性硫的标准试验方法

2024-01-15

Methods of test for petroleum and its products-Petroleum products. Electrical insulating oils. Detection of corrosive sulfur
石油及其产品的试验方法 石油产品 电气绝缘油 腐蚀性硫的检测

2009-07-31

矿物绝缘油中腐蚀性硫的定量测试铜粉腐蚀法
Test method for quantitative determination of corrosive sulfur in mineral insulating oils Copper powder corroding test

2015-07-01

BS EN 62535. Insulating liquids. Test method for detection of potentially corrosive sulfur in used and unused insulating oil
英国标准EN 62535 绝缘液体 已用和未用绝缘油中潜在腐蚀性硫检测的试验方法

2007-08-06

Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
气相色谱法分析电绝缘油中溶解气体的标准试验方法

2017-11-15

Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
原子吸收分光光度法测定电绝缘油中溶解铜的标准试验方法

2021-12-01

Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
建筑材料与石油电绝缘油相容性的标准试验方法

2019-12-01

矿物绝缘油与变压器材料相容性测定方法
(ASTM D 3455-2011,Standard test method for compatibility of constructionmaterial with electrical insulating oil of petroleum origin, MOD)

2018-04-03

电器绝缘油中2，6-二叔丁基对甲酚和2，6-二叔丁基苯酚含量测定法（红外吸收光谱法）
Standard test method for 2,6-di-tert-butyl-p-cresol and 2,6-di-tert-butyl phenol in electrical insulating oil by infrared absorption

2007-08-01

Common test methods for insulating and sheathing materials of electric and optical cables -- Part 2-1: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests (FOREIGN STANDARD)
电缆和光缆绝缘和护套材料通用试验方法第2-1部分:弹性化合物专用试验方法耐臭氧、热固性和矿物油浸没试验（国外标准）

2003-01-01

电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23℃ - DC resistivity at 23℃ and 100℃

2008-06-26

전기 케이블 및 광 케이블의 절연체 및 시스 재료 — 공통 시험방법 —제5-1부: 충전용 화합물의 시험방법 —적하점 — 기름 분리 — 저온에서 부서짐— 총산가 — 부식성 — 23 ℃에서의 유전율— 23 ℃ 및 100 ℃에서의 직류 저항률
电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充化合物专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀成分.23℃下的介电常数.23℃和100℃下的直流电阻率

2021-10-21

INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 5-1: METHODS SPECIFIC TO FILLING COMPOUNDS. DROPT POINT. SEPARATION OF OIL. LOW TEMPERATURE BRITTLENESS. TOTAL ACID NUMBER. ABSENCE OF CORROSIVE COMPONENTS. PERMITTIVITY AT 23 ºC. DC RESISTIVITY AT 23 ºC AND
电缆和光缆的绝缘和护套材料 常见的测试方法 第5-1部分:填充化合物的特定方法 下降点 分离油 低温脆性 总酸值 无腐蚀性成分 23℃时的介电常数 23℃时的直流电阻率和

1999-09-22

Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
用红外吸收法测定电绝缘油中的2,6-丁基苯酚和2,6-丁基苯酚的标准试验方法

2021-12-01

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C (IEC 60811-5-1:1990, modified + A1:2003); German version EN 60811-5-1:1999 + A1:2004
电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充化合物专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀成分.23°C下的介电常数.直流电阻率

2004-12-01