1.1本标准涵盖了在运行的核电站中建立涂层服务水平I涂层系统状态评估监测程序的程序。监测是评估在用涂层系统状况和性能的持续过程。 1.2本标准旨在为制定涂层状况评估计划提供推荐依据，而不是为所有计划规定单一依据。本标准中所述程序的变更或简化可能适用于每个正在运行的核电站，具体取决于其许可承诺。类似指南适用于涂层服务等级III和安全壳外的其他区域。 1.3本标准不满足ASME第XI节，在役检查IWE和IWL小节的要求。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 建立在役涂层监测计划允许根据需要规划和优先考虑涂层维护工作，以保持核涂层服务一级涂层系统中的涂层完整性和性能。 有关核维护涂层工作的更多信息，请参阅ASTM《核电站维护涂层手册》。 涂层监测计划能够早期识别和检测涂层系统中的潜在问题。一些涂层服务一级涂层系统可能事先被认为可疑、有缺陷或不合格。监控涂层性能将有助于制定后续程序，以解决与涂层工作相关的任何重大缺陷。 在设计基准事故条件下，劣化涂层可能会产生碎片，对事故后安全系统的性能产生不利影响。可能需要涂层监测计划来履行核电站设施中涂层服务一级涂层工作的安全分析报告和一般信函承诺。

1.1 This standard covers procedures for establishing a monitoring program for condition assessment of Coating Service Level I coating systems in operating nuclear power plants. Monitoring is an ongoing process of evaluating the condition and performance of the in-service coating systems. 1.2 It is the intent of this standard to provide a recommended basis for establishing a coatings condition assessment program, not to mandate a singular basis for all programs. Variations or simplifications of the program described in this standard may be appropriate for each operating nuclear power plant depending on their licensing commitments. Similar guidelines are applicable for Coating Service Level III and other areas outside containment. 1.3 This standard does not address the requirements of ASME Section XI, In-Service Inspection Subsections IWE and IWL. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== Establishment of an in-service coatings monitoring program permits planning and prioritization of coatings maintenance work as needed to maintain coating integrity and performance in nuclear Coating Service Level I coating systems. For additional information on nuclear maintenance coating work, refer to ASTM Manual on Maintenance Coatings for Nuclear Power Plants. A coatings monitoring program enables early identification and detection of potential problems in coating systems. Some Coating Service Level I coating systems may be known in advance to be suspect, deficient, or unqualified. Monitoring coating performance will assist in developing follow-up procedures to resolve any significant deficiency relative to coating work. Degraded coatings may generate debris under design basis accident conditions that could adversely affect the performance of the post-accident safety systems. A coatings monitoring program may be required to fulfill safety analysis report and generic letter commitments for Coating Service Level I coating work in a nuclear power plant facility.