本文件的范围是提供评估工人暴露于环境中的一般程序 工作场所的电场、磁场和电磁场，以确定是否符合暴露要求 欧洲指令2013/35/EU中规定的限值和/或作用水平。 本文件的目的是 -如有必要，说明如何对工人暴露于电磁场（EMF）的水平进行初步评估，包括通过测量和/或测量对此类水平进行具体暴露评估 计算， -确定是否有必要对EMF暴露进行详细的风险评估。 雇主可使用本文件进行风险评估，并在需要时进行测量和/或 工人暴露的计算。根据特定的工作场所和其他标准，可以 确定是否必须采取预防措施/行动以遵守 指令。 覆盖频率为0 Hz至300 GHz。交叉引用:EN 60601-2-33:2010/A2:2015EN IEC 62822-3:2018EN 50647:2017EN 50663: 2017EN 62822-2:2016EN 62232:2017EN 50664:2017EN 62479:2010EN 50496EN 50413EN 61029-1:2009EN 50527-2-1:2016EN 62369-1:2009EN 62226-1:2005EN 50527-2:2018EN 62226-3-1:2007EN 50527-1:2016EN 60335-2-29:2004EN 60745-1:2009EN 50364:2018EN 60335-2购买本文件时可提供的所有当前修订内容。

The scope of this document is to provide a general procedure for the assessment of workers' exposure to electric, magnetic and electromagnetic fields in a workplace in order to determine compliance with exposure limit values and/or action levels as stated in European Directive 2013/35/EU. The purpose of this document is to — specify how to perform an initial assessment of the levels of workers' exposure to electromagnetic fields (EMF), if necessary, including specific exposure assessment of such levels by measurements and/or calculations, — determine whether it is necessary to carry out a detailed risk assessment of EMF exposure. This document can be used by employers for the risk assessment and, where required, measurement and/or calculation of the exposure of workers. Based on specific workplace and other standards, it can be determined whether preventive measures/actions have to be taken to comply with the provisions of the Directive. The frequencies covered are from 0 Hz to 300 GHz.Cross References:EN 60601-2-33:2010/A2:2015EN IEC 62822-3:2018EN 50647:2017EN 50663:2017EN 62822-2:2016EN 62232:2017EN 50664:2017EN 62479:2010EN 50496EN 50413EN 61029-1:2009EN 50527-2-1:2016EN 62369-1:2009EN 62226-1:2005EN 50527-2-2:2018EN 62226-3-1:2007EN 50527-1:2016EN 60335-2-29:2004EN 60745-1:2009EN 50364:2018EN 60335-2-45:2002All current amendments available at time of purchase are included with the purchase of this document.