Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
废物的特性描述 符合性浸出试验 对于最小尺寸固定的试验部分 在固定液表面积比（L/A）下对整体进行一阶段分批浸出试验

2012-07-31

Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions; German version CEN/TS 15863:2012
废物特性.基本特性的浸出行为试验.固定试验条件下定期更新浸出剂的动态整体浸出试验；德文版CEN/TS 15863:2012

2012-11-01

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges-One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
废物的特性描述 浸出 颗粒废料和污泥浸出的符合性试验

2002-10-15

Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions; German version CEN/TS 15862:2012
废物的特性描述——符合性浸出试验——在固定最小尺寸的试验部分 以固定的液表面积比（L/a）对整块石进行一阶段分批浸出试验；德文版CEN/TS 15862:2012

2012-11-01

Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s); German version CEN/TS 15864:2012
废物的特性描述.基本特性的浸出行为试验.在与特定情况相关的条件下 连续浸出剂更新的动态整体浸出试验；德文版CEN/TS 15864:2012

2012-11-01

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges-One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
废物的特性描述 浸出 颗粒废料和污泥浸出的符合性试验

2002-10-15

BS EN 15864. Characterisation of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
英国标准EN 15864 废物的特性描述 基本特性的浸出行为测试 在与特定情景相关的条件下进行连续浸出剂更新的动态整体浸出试验

2008-10-17

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges-Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction)
废物的特性描述 浸出 颗粒废料和污泥浸出的符合性试验

2002-10-15

BS EN 15862. Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
英国标准EN 15862 废物的特性 符合性浸出试验 对于最小尺寸固定的试验部分 以固定的液表面积比（L/a）对整体进行一阶段分批浸出试验

2008-10-13

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with a particle size below 4 mm (with or without size reduction)
废物浸出特性；颗粒物和污泥浸出的符合性试验.第2部分:液固比为10 l/kg、粒径小于4mm（无或有粒径减小）的一阶段分批试验；德文版EN 12457-2:2002

2003-01-01

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with particle size below 10 mm (with or without size reduction)
废物浸出特性；粒状废料和污泥浸出的符合性试验.第4部分:以10 l/kg的液固比 对粒径小于10 mm的材料进行一阶段批量试验（无或有限制的粒径减小）；德文版EN 12457-4:2002

2003-01-01

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第4部分:以10 l/kg的液固比对粒径小于10 mm的材料进行一阶段批量试验（无或有粒径减小）

2003-07-25

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 2: One stage batch test at a liquid to solid ratio of 10 k/kg for materials with particle size below 4 mm (without or with size reduction)
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第2部分:粒径小于4mm（无或有粒径减小）材料的液固比为10k/kg的一阶段批量试验

2003-07-18

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2 l/kg for materials with high solids content and with particle size below 4 mm (with or without size reduction)
废物浸出特性；颗粒物和污泥浸出的符合性试验.第1部分:液固比为2L/kg、粒径小于4mm（无或有粒径减小）的一阶段分批试验；德文版EN 12457-1:2002

2003-01-01

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without of with size reduction).
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第1部分:高固体含量和粒径小于4mm（不减小粒径）材料的液固比为2 l/kg的一阶段批量试验

2003-07-18

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第3部分:高固体含量和粒径小于4mm（无或有粒径减小）材料的液固比为2L/kg和8L/kg的两阶段批量试验

2003-07-25