首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 UNE-EN 12457-3:2003
到馆提醒
收藏跟踪
购买正版
Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) 废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第3部分:高固体含量和粒径小于4mm(无或有粒径减小)材料的液固比为2L/kg和8L/kg的两阶段批量试验
发布日期: 2003-07-25
分类信息
发布单位或类别: 西班牙-西班牙标准
关联关系
研制信息
相似标准/计划/法规
现行
BS EN 14997-2015
Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control
废物的特性 浸出行为试验 pH值对连续pH控制浸出的影响
2015-03-31
现行
UNE-CEN/TS 14997-2007 EX
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control
废物特性.浸出行为试验.pH值对连续pH值控制浸出的影响
2007-11-28
现行
BS EN 14429-2015
Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition
废物的特性 浸出行为试验 pH值对初始酸碱添加浸出的影响
2015-03-31
现行
DIN EN 15863
Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
废物特性.基本特性的浸出行为试验.固定条件下定期更新浸出剂的动态整体浸出试验;德文版EN 15863:2015
2015-06-01
现行
BS EN 15863-2015
Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
废物的特性 基本特性的浸出行为测试 固定条件下定期更新浸出剂的动态整体浸出试验
2015-04-30
现行
BS DD CEN/TS 15364-2006
Characterization of waste. Leaching behaviour tests. Acid and base neutralization capacity test
废物的特性 浸出行为测试 酸碱中和能力试验
2006-07-31
现行
UNE-CEN/TS 15364-2008 EX
Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test
废物特性.浸出性能试验.酸碱中和能力试验
2008-04-16
现行
BS PD CEN/TS 15864-2015
Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
废物的特性 基本特性的浸出行为测试 在与特定情景相关的条件下进行连续浸出剂更新的动态整体浸出试验
2015-12-31
现行
BS PD CEN/TS 16660-2015
Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacity
废物的特性 浸出行为试验 还原性和还原能力的测定
2015-05-31
现行
BS 08/30185782 DC
BS EN 15862. Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
英国标准EN 15862 废物的特性 符合性浸出试验 对于最小尺寸固定的试验部分 以固定的液表面积比(L/a)对整体进行一阶段分批浸出试验
2008-10-13
现行
DIN CEN/TS 14429
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition; German version CEN/TS 14429:2005
废物特性.浸出行为试验.初始酸/碱添加时pH值对浸出的影响;德文版CEN/TS 14429:2005
2006-01-01
现行
BS EN 14405-2017
Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
废物的特性 浸出行为试验 上流式渗滤试验(在规定条件下)
2017-03-31
现行
DIN EN 14405
Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
废物特性.浸出性能试验.上流式渗滤试验(在规定条件下)
2017-05-01
现行
DIN EN 12457-2
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with a particle size below 4 mm (with or without size reduction)
废物浸出特性;颗粒物和污泥浸出的符合性试验.第2部分:液固比为10 l/kg、粒径小于4mm(无或有粒径减小)的一阶段分批试验;德文版EN 12457-2:2002
2003-01-01
现行
DIN EN 12457-4
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with particle size below 10 mm (with or without size reduction)
废物浸出特性;粒状废料和污泥浸出的符合性试验.第4部分:以10 l/kg的液固比 对粒径小于10 mm的材料进行一阶段批量试验(无或有限制的粒径减小);德文版EN 12457-4:2002
2003-01-01
现行
UNE-EN 12457-4-2003
Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第4部分:以10 l/kg的液固比对粒径小于10 mm的材料进行一阶段批量试验(无或有粒径减小)
2003-07-25
现行
UNE-EN 12457-2-2003
Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 2: One stage batch test at a liquid to solid ratio of 10 k/kg for materials with particle size below 4 mm (without or with size reduction)
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第2部分:粒径小于4mm(无或有粒径减小)材料的液固比为10k/kg的一阶段批量试验
2003-07-18
现行
BS PD CEN/TS 15862-2012
Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
废物的特性描述 符合性浸出试验 对于最小尺寸固定的试验部分 在固定液表面积比(L/A)下对整体进行一阶段分批浸出试验
2012-07-31
现行
DIN EN 12457-1
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2 l/kg for materials with high solids content and with particle size below 4 mm (with or without size reduction)
废物浸出特性;颗粒物和污泥浸出的符合性试验.第1部分:液固比为2L/kg、粒径小于4mm(无或有粒径减小)的一阶段分批试验;德文版EN 12457-1:2002
2003-01-01
现行
UNE-EN 12457-1-2003
Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without of with size reduction).
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第1部分:高固体含量和粒径小于4mm(不减小粒径)材料的液固比为2 l/kg的一阶段批量试验
2003-07-18