1.1 本规范涵盖由冷拉钢丝制成的不锈钢和镀锌碳钢砌体接缝钢筋。接头钢筋由焊接到交叉钢丝上的纵向钢丝组成。 1.2 以英寸磅单位或国际单位制表示的数值应单独视为标准值。在文本中，SI单位显示在括号中。每个系统中规定的值可能不完全相等；因此，每个系统应独立使用。组合两个系统的值可能导致不符合规范。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers stainless steel and galvanized carbon steel masonry joint reinforcement fabricated from cold-drawn steel wire. Joint reinforcement consists of longitudinal wires welded to cross wires. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.