1.1 本规程涵盖了设计工程界在工程图纸上使用的标准符号，用于表示任何类型粘合剂的粘结组件。 1.2 该设计基于ANSI/AWS A2.4和ISO 15785中包含的标准。 1.3 以SI单位给出的值应视为标准值。括号中的值仅供参考。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 3.1 粘合剂符号提供了在工程图纸上放置有关粘合剂的完整信息的有效方法。关节是箭头线指向的符号的参考基础。符号的参考线用于指定要使用的粘合剂类型，包括关于其物理形式、化学技术系列、表面处理要求、涂敷方法（涂珠与滚涂）和固化方法的信息。可选尾部（如中左侧所示 图1 )提供了一个地方，以包括其他符号中未提及的关于粘合剂的附加信息。 图1 粘合剂符号元素的标准位置 3.2 提到 图1 有关粘合剂符号的概述示意图，该符号由支柱表示，支柱内有一个圆圈，字母“a”表示粘合剂。 在第节中的相应表格中可以找到所述元素（例如FORM、CHEM、APPL METH）背后的详细信息 5. .

1.1 This practice covers a standard symbol that may be used by the design-engineering community on engineering drawings to indicate a bonded assembly for any type of adhesive. 1.2 This design is based on criteria contained in ANSI/AWS A2.4 as well as ISO 15785. 1.3 The values given in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 An adhesive symbol provides an efficient means of placing complete information about adhesives on engineering drawings. The joint is the basis of reference for the symbol to which the arrow line is pointed. The reference line of the symbol is used to designate the type of adhesive to be used, including information about its physical form, chemical technology family, requirements for surface preparation, application method (bead versus roll coat), and cure method. The optional tail (shown at left in Fig. 1 ) provides a place to include additional information about the adhesive that is not referenced in other notations. FIG. 1 Standard Locations of Elements of the Adhesive Symbol 3.2 Refer to Fig. 1 for an overview schematic of the adhesive symbol denoted by a mast supporting a circle with the letter “A” inside for adhesive. Detail behind each of the elements noted (for example, FORM, CHEM, APPL METH) can be found in corresponding tables in Section 5 .