1.1 本规范涵盖拟用于输送污水、工业废物和雨水以及涵洞施工的钢筋混凝土管。 1.2 本规范是本规范的英寸磅配套规范 C76M ; 因此，本规范中未提供SI等效物。符合规范要求的钢筋混凝土管 C76M ，根据本规范可接受 C76 除非业主禁止。 注1: 本规范仅为制造和采购规范，不包括垫层、回填要求或现场荷载条件与管道强度分类之间的关系。然而，经验表明，该产品的成功性能取决于正确选择管道类别、垫层和回填类型，并注意安装是否符合施工规范。 此处规定的钢筋混凝土管道的所有者应注意，他必须将现场要求与规定的管道等级相关联，并在施工现场进行检查。 注2: 请注意钢筋混凝土D荷载涵洞、雨水管和污水管规范（规范 C655型 ).

1.1 This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 This specification is the inch-pound companion to Specification C76M ; therefore, no SI equivalents are presented in this specification. Reinforced concrete pipe that conform to the requirements of C76M , are acceptable under this Specification C76 unless prohibited by the Owner. Note 1: This specification is a manufacturing and purchase specification only, and does not include requirements for bedding, backfill, or the relationship between field load condition and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, and care that installation conforms to the construction specifications. The owner of the reinforced concrete pipe specified herein is cautioned that he must correlate the field requirements with the class of pipe specified and provide inspection at the construction site. Note 2: Attention is called to the specification for reinforced concrete D-load culvert, storm drain, and sewer pipe (Specification C655 ).