EJ/T 20077-2014-铅硼聚乙烯板规范-国家数字标准馆

现行 EJ/T 20077-2014

到馆阅读

收藏跟踪

购买正版

铅硼聚乙烯板规范 Specification for lead-boron-polyethylene board

发布日期： 2014-11-17

实施日期： 2015-02-01

分类信息

发布单位或类别：中国-行业标准-核工业

CCS分类： F79能源、核技术 - 辐射防护与监测 - 防护用具与设备

ICS分类： 13.340环保、保健和安全 - 防护设备

关联关系

研制信息

归口单位：核工业标准化研究所

起草单位：中国核动力研究设计院

起草人：吴莹、尹昌耕、杨静、刘超红、乔洪波、许贵平

相似标准/计划/法规

ECA/EIA SP 2805

DETAIL SPECIFICATION FOR FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS RADIAL LEADED
径向引线聚乙烯对苯二甲酸酯膜介质直流固定电容器详细规范

Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded
轴向引线金属化聚对苯二甲酸乙二醇酯薄膜介质直流固定电容器详细规范

GOST 29137-1991

Формовка выводов и установка изделий электронной техники на печатные платы. Общие требования и нормы конструирования
引线成型和电子部件插入到PC板上一般要求和设计规范

IEC 60115-2-2023

Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)
电子设备用固定电阻器.第2部分:分规范:电路板通孔组件用带引线的低功率薄膜电阻器（THT）

BS EN 61249-4-14-2009

Materials for printed boards and other interconnecting structures-Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印制板和其他互连结构用材料

BS EN 61249-4-15-2009

Materials for printed boards and other interconnecting structures-Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印制板和其他互连结构用材料

BS EN 61249-4-17-2009

Materials for printed boards and other interconnecting structures-Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印制板和其他互连结构用材料

IEC 61249-4-14-2009

Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印刷板和其他互连结构材料 - 第4-14部分:预浸料材料（用于制造多层板材）的环氧树脂编织的E玻璃预浸料（垂直燃烧试验）用于无铅装配

KS C IEC 61249-4-14(2016 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-14부：(다층기판용) 프리프레그 소재에 대한 표준－에폭시 수지로 구성되며 (수직연소시험에서) 규정된 난연등급의 무연공정용 직조 E-유리섬유강화 프리프레그
印制板和其他互连结构用材料第4-14部分:非包覆预浸料分规范（多层板制造用）无铅装配用规定可燃性的环氧编织E玻璃预浸料（垂直燃烧试验）

KS C IEC 61249-4-14(2021 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-14부：(다층기판용) 프리프레그 소재에 대한 표준－에폭시 수지로 구성되며 (수직연소시험에서) 규정된 난연등급의 무연공정용 직조 E-유리섬유강화 프리프레그
印制板和其他互连结构用材料第4-14部分:未包覆预浸料分规范集（用于制造多层板）－无铅组装用规定可燃性的环氧编织E-玻璃预浸料（垂直燃烧试验）

BS EN 61249-4-16-2009

Materials for printed boards and other interconnecting structures-Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印制板和其他互连结构用材料

KS C IEC 61249-4-15(2016 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-15부：(다층기판용) 무동박 프리프레그 재료에 대한 부분규격－난연등급(수직연소 시험)의 무연공정용 유리섬유 직조 다관능 에폭시 프리프레그
印制板和其他互连结构用材料第4-15部分:非包覆预浸料分规范（多层板制造用）无铅装配用规定可燃性的多功能环氧编织E玻璃预浸料（垂直燃烧试验）

KS C IEC 61249-4-15(2021 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-15부：(다층기판용) 무동박 프리프레그 재료에 대한 부분규격－난연등급(수직연소 시험)의 무연공정용 유리섬유 직조 다관능 에폭시 프리프레그
印制板和其他互连结构用材料第4-15部分:未包覆预浸料分规范集（用于制造多层板）无铅组装用规定可燃性的多功能环氧编织E-玻璃预浸料（垂直燃烧试验）

IEC 61249-4-15-2009

Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印刷板和其他互连结构材料 - 第4-15部分:预浸料材料（用于多层板的制造）的分段规格 - 多功能环氧化物编织的易燃性E玻璃预浸料（垂直燃烧试验）无铅部件

KS C IEC 61249-4-17(2016 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-17부：(다층기판용) 무동박 프리프레그 재료에 대한 부분규격－난연등급(수직연소 시험)의 무연공정용 유리섬유 직조 비할로겐 에폭시 프리프레그
印制板和其他互连结构用材料第4-17部分:非包覆预浸料分规范（多层板制造用）无铅装配用规定可燃性的非卤化环氧编织E玻璃预浸料（垂直燃烧试验）

KS C IEC 61249-4-17(2021 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-17부：(다층기판용) 무동박 프리프레그 재료에 대한 부분규격－난연등급(수직연소 시험)의 무연공정용 유리섬유 직조 비할로겐 에폭시 프리프레그
印制板和其他互连结构用材料第4-17部分:未包覆预浸料分规范集（用于多层板的制造）无铅组装用规定可燃性的非卤化环氧编织E-玻璃预浸料（垂直燃烧试验）

IEC 61249-4-18-2013

Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印刷电路板和其他互连结构材料第4-18部分:预浸料材料（用于制造多层板材）的分段规格 - 高性能环氧树脂编织的易燃易燃玻璃预浸料（垂直燃烧试验）用于无铅部件

IEC 61249-4-17-2009

Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印刷电路板和其他互连结构材料 - 第4-17部分:预浸料材料（用于制造多层板材）的分段规格 - 非卤化环氧树脂编织的易燃性E玻璃预浸料（垂直燃烧试验）铅 - 免费装配

IEC 61249-4-16-2009

Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
印制板和其他互连结构用材料.第4-16部分:非包覆预浸料分规范集（用于制造多层板）.无铅组装用规定可燃性的多功能非卤化环氧编织E-玻璃预浸料（垂直燃烧试验）

KS C IEC 61249-4-16(2016 Confirm)

인쇄회로기판 및 기타 전자배선용 재료－제4-16부：(다층기판용) 무동박 프리프레그 재료에 대한 부분규격－난연등급(수직연소 시험)의 무연공정용 유리섬유 직조 다관능 비할로겐 에폭시 프리프레그
印制板和其他互连结构用材料第4-16部分:非包覆预浸料分规范（多层板制造用）无铅装配用规定可燃性的多功能非卤化环氧编织E玻璃预浸料（垂直燃烧试验）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统