MIL AN531-5 Notice 1-Inactivation 1-自攻螺钉螺纹成形或螺纹切削 82度平头间隔螺纹（代替AN531-4）-国家数字标准馆

现行 MIL AN531-5 Notice 1-Inactivation 1

到馆提醒

收藏跟踪

购买正版

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD (SUPERSEDING AN531-4) 自攻螺钉螺纹成形或螺纹切削 82度平头间隔螺纹（代替AN531-4）

发布日期： 1997-06-16

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL AN531-5 Notice 2-Validation 1

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
螺纹成形或螺纹切削自攻螺钉 82度平头间隔螺纹

MIL AN531-5 Amendment 1

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
螺纹成形或螺纹切削自攻螺钉 82度平头间隔螺纹

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
螺纹成型或螺纹切割螺钉 82度平头间隔螺纹

NASM 51862 Rev.2

Screw, Tapping, Thread Forming, Type AB, Flat 82 Degrees Countersunk Head, Cross-Recessed
AB型82度沉头十字槽螺纹成型自攻螺钉

Screw, Machine-Flat 82 Deg Head, Full Thread, Torq-Set
螺纹 82度平头全螺纹 Torq套件

MIL AN530-6 Notice 1-Cancellation 1

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, ROUND HEAD, SPACED THD (S/S BY MS51861A)
螺纹成形或螺纹切削自攻螺钉圆头间距为MS51861A

MIL MS24627 Notice 3-Cancellation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (S/S BY NASM24627-1998)
碳钢十字槽82度沉头D、F、G或T型自攻螺纹切削螺钉（NASM24627-1998标准S/S）

NASM 24627 Rev.1

Screw, Tapping, Thread Cutting, Types D,F,G or T, Flat 82 degree Countersunk Head, Cruciform Recess, Carbon Steel
碳钢十字槽82度沉头D、F、G或T型螺纹切削自攻螺钉

NASM 24628 Rev.1(R2016)

Screw, Tapping-Thread Cutting, Types D, F,G or T, Flat 82 Countersunk Head, Cross-Recessed, Corrosion- Resisting Steel
耐腐蚀钢十字槽82沉头D、F、G或T型自攻螺纹切削螺钉

MIL MS24627C Notice 1-Validation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24627B)(S/S BY NASM24627-1998)
螺丝 TAPPING-THREAD切割 D F G或T型平面82度 COUNTERSUNK HEAD CROSS-RECESSED 碳钢（取代MS24627B）（S/S BY NASM24627-1998）

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24627B)(S/S BY NASM24627-1998)
碳钢十字槽82度沉头D、F、G或T型自攻螺纹切削螺钉（取代MS24627B）（NASM24627-1998标准S/S）

MIL MS24628C Notice 3-Cancellation

SCREW, TAPPING-THREAD CUTTING, TYPES D,F,G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION-RESISTING STEEL (SUPERSEDING MS24628B) (S/S BY NASM24628-1999)
D、F、G或T型自攻螺钉 82度平沉头十字槽耐腐蚀钢（取代MS24628B）

SCREW, TAPPING-THREAD CUTTING, TYPES D,F,G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION-RESISTING STEEL (SUPERSEDING MS24628B) (S/S BY NASM24628-1999)
D、F、G或T型十字槽82°沉头耐蚀钢自攻螺纹切削螺钉（取代MS24628B）（NASM24628-1999标准S/S）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统