SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
螺纹成形或螺纹切削自攻螺钉 82度 平头 间隔螺纹

2019-07-24

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
螺纹成形或螺纹切削自攻螺钉 82度 平头 间隔螺纹

1996-05-20

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD (SUPERSEDING AN531-4)
自攻螺钉 螺纹成形或螺纹切削 82度 平头 间隔螺纹（代替AN531-4）

1997-06-16

Screw, Tapping, Thread Forming, Type AB, Flat 82 Degrees Countersunk Head, Cross-Recessed
AB型82度沉头十字槽螺纹成型自攻螺钉

2018-07-31

Screw, Machine-Flat 82 Deg Head, Full Thread, Torq-Set
螺纹 82度平头 全螺纹 Torq套件

2001-01-08

SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, ROUND HEAD, SPACED THD (S/S BY MS51861A)
螺纹成形或螺纹切削自攻螺钉 圆头 间距为MS51861A

1991-08-22

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (S/S BY NASM24627-1998)
碳钢十字槽82度沉头D、F、G或T型自攻螺纹切削螺钉（NASM24627-1998标准S/S）

1999-10-27

Screw, Tapping, Thread Cutting, Types D,F,G or T, Flat 82 degree Countersunk Head, Cruciform Recess, Carbon Steel
碳钢十字槽82度沉头D、F、G或T型螺纹切削自攻螺钉

2013-02-28

Screw, Tapping-Thread Cutting, Types D, F,G or T, Flat 82 Countersunk Head, Cross-Recessed, Corrosion- Resisting Steel
耐腐蚀钢十字槽82沉头D、F、G或T型自攻螺纹切削螺钉

2011-12-22

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24627B)(S/S BY NASM24627-1998)
螺丝 TAPPING-THREAD切割 D F G或T型 平面82度 COUNTERSUNK HEAD CROSS-RECESSED 碳钢（取代MS24627B）（S/S BY NASM24627-1998）

1988-05-20

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24627B)(S/S BY NASM24627-1998)
碳钢十字槽82度沉头D、F、G或T型自攻螺纹切削螺钉（取代MS24627B）（NASM24627-1998标准S/S）

1975-05-15

SCREW, TAPPING-THREAD CUTTING, TYPES D,F,G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION-RESISTING STEEL (SUPERSEDING MS24628B) (S/S BY NASM24628-1999)
D、F、G或T型自攻螺钉 82度平沉头 十字槽 耐腐蚀钢（取代MS24628B）

1999-12-14

SCREW, TAPPING-THREAD CUTTING, TYPES D,F,G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION-RESISTING STEEL (SUPERSEDING MS24628B) (S/S BY NASM24628-1999)
D、F、G或T型十字槽82°沉头耐蚀钢自攻螺纹切削螺钉（取代MS24628B）（NASM24628-1999标准S/S）

1975-05-15