现行

ASM SA-94

N-A-X HIGH-TENSILE - High Strength Low Alloy Steel
N-A-X高强度-高强度低合金钢

1960-01-01

现行

ASM SA-94

N-A-X HIGH-TENSILE - High Strength Low Alloy Steel
N-A-X高强度-高强度低合金钢

1960-01-01

现行

SAE J1677_202209

Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
碳钢和高强度低合金钢管的试验和程序

2022-09-08

现行

ISS PB-212

Plates: Rolled Floor Plates, Carbon, High Strength Low Alloy, and Alloy Steel: Steel Products Manual
板材:轧制地板、碳、高强度低合金和合金钢:钢产品手册

1997-05-01

现行

ASTM A732/A732M-20

Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
通用碳素钢和低合金钢熔模铸件及高温高强度钴合金的标准规范

2020-05-01

现行

ASM SA-446

ASTM A710 - Low Carbon, Precipitation Hardening High-Strength Alloy Steel
ASTM A710-低碳沉淀硬化高强度合金钢

1990-04-01

现行

ASM SA-446

ASTM A710 - Low Carbon, Precipitation Hardening High-Strength Alloy Steel
ASTM A710-低碳沉淀硬化高强度合金钢

1990-04-01

现行

ASTM A786/A786M-15(2021)

Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
热轧碳、低合金、高强度低合金和合金钢地板的标准规范

2021-09-01

现行

ASTM A414/A414M-24

Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
压力容器用碳素钢和高强度低合金钢板标准规范

2024-08-15

现行

GB/T 3274-2017

碳素结构钢和低合金结构钢热轧钢板和钢带
Hot-rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels

2017-02-28

现行

ASTM A1011/A1011M-23

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
具有改进成形性和超高强度的高强度低合金结构热轧薄钢板和钢带

2023-05-01

现行

ASTM A595/A595M-22

Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
结构用锥形低碳或高强度低合金钢管

2022-09-01

现行

ASTM A1039/A1039M-20

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
用双辊铸造工艺生产的高强度低合金和超高强度的工业用结构热轧碳素钢薄板的标准规范

2020-07-01

现行

ASTM A1083/A1083M-23

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
用双辊铸造法生产的结构高强度低合金冷轧薄钢板

2023-11-01

现行

ASTM A1112/A1112M-18

Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
圆形和形状的冷成型焊接高强度碳钢或高强度低合金钢空心结构型材（HSS）的标准规范

2018-11-01

现行

MIL MIL-E-22200/10C Notice 1-Cancellation 1

ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM, HIGH TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS
焊条 焊接 矿物覆盖 铁粉末 低氢介质 高强度和高强度低合金钢

2018-10-02

现行

SAE AMS2759/1J

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
碳钢和低合金钢零件的热处理最低抗拉强度低于220 ksi（1517 MPa）

2021-08-03

现行

ASTM A749/A749M-14(2021)

Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
热轧碳素钢和高强度低合金带材的一般要求

2021-09-01

现行

SAE ARP1631A

Manufacturing Sequence for Fabrication of High-Strength Steel Parts 300M or 4340 Modified Low-Alloy Steels 270,000 psi (1860 MPa) Tensile Strength and Higher
制造高强度钢零件300M或4340改性低合金钢270000 psi（1860 MPa）抗拉强度及以上的制造顺序

2018-09-27

现行

MIL MIL-S-13281E

STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUGTURES (STRESS RELIEVED) (SUPERSEDING MIL-S-13281D)
焊接结构用钢、碳钢、合金和高强度低合金（应力消除）（取代MIL-S-13281D）

1985-09-20