1.1本试验方法涵盖干式固体薄膜润滑剂粘附特性的测量。 1.2以国际单位制表示的数值应视为标准值。括号中给出的值仅供参考。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 有效的固体薄膜润滑剂涂层必须粘附在表面，以便在难以补充液体润滑剂的受限应用中提供足够的润滑。涂层附着力损失导致金属与金属接触，导致接触表面严重磨损。 粘附力对固体膜润滑剂的性能至关重要。固体膜润滑剂应用的示例包括汽车、飞机和航空航天硬件中的紧固件、轴承和滑动构件。 本试验方法旨在测定固体薄膜润滑剂涂层与水和其他液体接触时的附着力。本试验结果表明了润滑涂层在可能接触水或其他液体的应用中的适用性。

1.1 This test method covers the measurement of the adhesion characteristics of dry solid film lubricants. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are provided for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== Effective solid film lubricant coatings must adhere to surfaces to provide adequate lubrication in applications with restricted access where fluid lubricants cannot easily be replenished. Loss of coating adhesion results in metal to metal contact causing significant wear of contacting surfaces. Adhesion is critical to the performance of the solid film lubricant. Examples of solid film lubricant applications include fasteners, bearings and sliding members in automotive, aircraft, and aerospace hardware. This test method is intended to determine the adhesion of solid film lubricant coatings when submitted to contact with water and other fluids. Results of this test provide an indication of the suitability of the lubricant coating in applications where contact with water or other fluids is likely.