EN 1447:2009+A1:2010-塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 长期耐内压性的测定-国家数字标准馆

现行 EN 1447:2009+A1:2010

到馆提醒

收藏跟踪

购买正版

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure 塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 长期耐内压性的测定

发布日期： 2010-10-20

实施日期： 2010-10-20

本标准规定了在特定温度下内部静水压力下确定玻璃钢热固性塑料（GRP）管道失效时间的方法。外部环境可以是空气还是水。
注意对于其他内部或外部环境，参考标准应规定任何附加要求

This standard specifies a method for determining the time to failure of glass-reinforced thermosetting plastics (GRP) pipes under internal hydrostatic pressure at a specified temperature. The external environment can be air or water.
NOTE	For other internal or external environments the referring standard should specify any additional requirement.

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： Q10/29建材 - 建材产品

ICS分类： 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： CEN/TC 155-

相似标准/计划/法规

UNE-EN 1447-2009+A1-2011

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.长期耐内压性的测定

BS EN 1447-2009+A1-2010

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期抗内压性的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 원주 방향 초기 비강성의 측정
塑料管道系统 - 玻璃增强热固性塑料（grp）管道 - 初始特定环刚度的测定

EN 1393-1996/AC-1997

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始纵向拉伸性能的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始纵向拉伸性能的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始特定环刚度的测定

UNE-EN 1638-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD FOR THE EFFECTS OF CYCLIC INTERNAL PRESSURE.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管循环内压影响的试验方法

BS EN 1638-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
塑料管道系统玻璃纤维增强热固性塑料（GRP）管循环内压影响的试验方法

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 건조 조건에서 크리프 계수의 측정
塑料管道系统 - 玻璃增强热固性塑料（Grp）管道 - 干燥条件下蠕变因子的测定

JIS K 7033-1998

Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始拉伸性能的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 겉보기 초기 원주 방향 인장강도의 시험방법
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 测定表观初始周向拉伸强度的测试方法

EN 1394-1996/AC-1997

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
塑料管道系统 - 玻璃增强热固性塑料（GRP）管 - 表观初始周向拉伸强度的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
塑料管道系统 - 玻璃增强热固性塑料（GRP）管 - 表观初始周向拉伸强度的测定

BS EN 1228-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

BS EN 1393-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

UNE-EN 1393/AC-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

UNE-EN 1228-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

JIS K 7032-2002

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

JIS K 7038-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
塑料管道系统玻璃纤维增强热固性塑料（GRP）管耐初始环偏转的试验方法

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
塑料管道系统.玻璃增强热固性塑料（GRP）管.初始纵向拉伸强度测定的试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统