EN 1228:1996-塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始特定环刚度的测定-国家数字标准馆

现行 EN 1228:1996

到馆阅读

收藏跟踪

购买正版

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness 塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始特定环刚度的测定

发布日期： 1996-06-19

实施日期： 1996-06-19

本标准规定了确定玻璃增强热固性塑料（GRP）管道初始特定环刚度的方法。给出了两种方法，并且在指定的偏转限度内，每个方法同样有效，并可用于任何直径

This standard specifies methods for determining the initial specific ring stiffness of glass-reinforced thermosetting plastics (GRP) pipes. Two methods are given and within the specified deflection limits each is equally valid and may be used for any diameter.

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： Q10/29建材 - 建材产品

ICS分类： 83.140.30橡胶和塑料制品 - 塑料管、配件和阀门

关联关系

研制信息

归口单位： CEN/TC 155-

相似标准/计划/法规

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 원주 방향 초기 비강성의 측정
塑料管道系统 - 玻璃增强热固性塑料（grp）管道 - 初始特定环刚度的测定

BS EN 1228-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

UNE-EN 1228-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

JIS K 7032-2002

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

EN 1393-1996/AC-1997

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始纵向拉伸性能的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 初始纵向拉伸性能的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 원주 방향 초기 변형에 대한 저항성 시험방법
塑料管道系统 - 玻璃增强热固性塑料（Grp）管道 - 证明初始环偏转阻力的测试方法

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.初始比环刚度的测定；德文版EN 1228:1996

JIS K 7033-1998

Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始拉伸性能的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 겉보기 초기 원주 방향 인장강도의 시험방법
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 测定表观初始周向拉伸强度的测试方法

BS 09/30210543 DC

BS ISO 12512. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe
BS ISO 12512 塑料管道系统玻璃纤维增强热固性塑料（GRP）管使用从管道上切下的分段试件测定初始比环刚度和初始环挠度阻力

EN 1394-1996/AC-1997

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
塑料管道系统 - 玻璃增强热固性塑料（GRP）管 - 表观初始周向拉伸强度的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
塑料管道系统 - 玻璃增强热固性塑料（GRP）管 - 表观初始周向拉伸强度的测定

BS EN 1393-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

UNE-EN 1393/AC-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

JIS K 7038-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
塑料管道系统玻璃纤维增强热固性塑料（GRP）管耐初始环偏转的试验方法

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
塑料管道系统.玻璃增强热固性塑料（GRP）管.初始纵向拉伸强度测定的试验方法

UNE-EN 1393-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIEPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
塑料管道系统玻璃纤维增强热固性塑料（GRP）片材初始纵向拉伸性能的测定

UNE-EN 1226-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD TO PROVE THE RESISTANCE TO INITIAL RING DEFLECTION.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管证明抗初始环偏转的试验方法

EN 1447-2009+A1-2010

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道 - 长期耐内压性的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统