BS EN 60444-6. Measurement of quartz crystal unit parameters. Part 6. Measurement of drive level dependence (DLD)
英国标准EN 60444-6 石英晶体单元参数的测量 第六部分 驱动器电平相关性（DLD）的测量

2008-10-09

Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004); German version EN 60444-7:2004
石英晶体元件参数的测量.第7部分:石英晶体元件的活度和频率下降的测量（IEC 60444-7-2004）；德文版EN 60444-7:2004

2004-11-01

Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units (IEC 60444-9:2007); German version EN 60444-9:2007
石英晶体元件参数的测量.第9部分:压电晶体元件杂散共振的测量（IEC 60444-9-2007）；德文版EN 60444-9:2007

2007-12-01

Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency f<(Index)L> and the effective load capacitance C<(Index)Leff> using automatic network analyzer techniques and error correction (IEC 60444-11:2010); German version EN 60444-11:2010
石英晶体元件参数的测量.第11部分:用自动网络分析仪技术和误差校正测定负载谐振频率f<（指数）L>和有效负载电容C<（指数）Leff>的标准方法（IEC 60444-11-2010）；德文版EN 60444-1

2011-06-01

Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997
用pi网络中的零相位技术测量石英晶体元件参数.第2部分:测量石英晶体元件动态电容的相位偏移法（IEC 60444-2-1980）；德文版EN 60444-2:1997

1997-10-01

Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997
石英晶体元件参数的测量.第5部分:使用自动网络分析仪技术和误差校正测定等效电参数的方法（IEC 60444-5-1995）；德文版EN 60444-5:1997

1997-10-01

Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444-1:1986 + A1:1999); German version EN 60444-1:1997 + A1:1999
度网络中用零相位技术测量石英晶体元件参数.第1部分:度网络中用零相位技术测量石英晶体元件谐振频率和谐振电阻的基本方法（IEC 60444-1-1986+A1-1999）；德语版EN 6

2000-09-01

Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the parallel capacitance C<(Index)o> (IEC 60444-3:1986); German version EN 60444-3:1997
在pi网络中用零相位技术测量石英晶体单元参数.第3部分:在并联电容C<（指数）o>补偿的pi网络中用相位技术测量200 MHz以下石英晶体单元的两个终端参数的基本方法（IEC 60444-3:

1997-10-01

Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f<(Index)L>, load resonance resistance R<(Index)L> and the calculation of other derived values of quartz crystal units, up to 30 MHz (IEC 60444-4:1988); German version EN 60444-4:1997
在pi网络中用零相位技术测量石英晶体元件参数.第4部分:负载谐振频率f<（指数）L>和负载谐振电阻R<（指数）L>的测量方法和30 MHz以下石英晶体元件其他导出值的计算方法（IEC 60444-4）

1997-10-01

수정진동자의 매개변수 측정 ― 제11부: 자동 네트워크 분석기 기법과 오류수정을 통한 부하 공진주파수 fL과 유효 부하 커패시턴스 (CLeff)의 결정을 위한 표준 방법
石英晶体单位参数的测量 - 第11部分:使用自动网络分析仪技术和误差校正确定负载共振频率（f1）和有效负载电容（cleff）的标准方法

2016-12-29

수정진동자의 매개변수 측정 ― 제11부: 자동 네트워크 분석기 기법과 오류수정을 통한 부하 공진주파수 fL과 유효 부하 커패시턴스 (CLeff)의 결정을 위한 표준 방법
石英晶体单位参数的测量 - 第11部分:使用自动网络分析仪技术和误差校正确定负载共振频率（f1）和有效负载电容（cleff）的标准方法

2016-12-29

수정진동자의 매개변수 측정 ― 제11부: 자동 네트워크 분석기 기법과 오류수정을 통한 부하 공진주파수 fL과 유효 부하 커패시턴스 (CLeff)의 결정을 위한 표준 방법
石英晶体元件参数的测量.第11部分:使用自动网络分析仪技术和误差校正测定负载谐振频率fL和有效负载电容CLEF的标准方法

2016-12-29

수정진동자의 매개변수 측정 ― 제11부: 자동 네트워크 분석기 기법과 오류수정을 통한 부하 공진주파수 fL과 유효 부하 커패시턴스 (CLeff)의 결정을 위한 표준 방법
石英晶体元件参数的测量.第11部分:使用自动网络分析仪技术和误差校正测定负载谐振频率fL和有效负载电容CLEF的标准方法

2016-12-29

石英晶体元件参数的测量　第11部分：采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法
Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance C Leff using automatic network analyzer techniques and error correction

2018-03-15

Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency f_L and the effective load capacitance C_Leff using automatic network analyzer techniques and error correction
石英晶体元件参数的测量.第11部分:用自动网络分析仪技术和误差校正测定负载谐振频率f_L和有效负载电容C_Leff的标准方法

2010-10-07

Draft Document - Measurement of Quartz Crystal Unit Parameters - Part 11: Standard Method for the determination of the load resonance frequency f<(Index)L> and the effective load capacitance C<(Index)Leff> using automatic network analyzer techniques and error correction (IEC 49/806/CD:2008)
文件草案.石英晶体元件参数的测量.第11部分:使用自动网络分析仪技术和误差校正测定负载谐振频率f<（指数）L>和有效负载电容C<（指数）Leff>的标准方法（IEC 49/806/CD:2008）

2008-09-01