现行

BS EN 1716-1997

Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee
塑料管道系统 聚乙烯（PE）开孔三通 组装攻丝三通的抗冲击性试验方法

1997-07-15

现行

UNE-EN 1716-1997

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) TAPPING TEES. TEST METHOD FOR IMPACT RESISTANCE OF AN ASSEMBLED TAPPING TEE.
塑料管道系统 聚乙烯（PE）开孔三通 组装攻丝三通的抗冲击性试验方法

1997-11-14

现行

GB/T 19712-2005

塑料管材和管件 聚乙烯（PE）鞍形旁通抗冲击试验方法
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

2005-03-23

现行

ISO 13957-1997

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
塑料管道和配件——聚乙烯（PE）开孔三通——抗冲击性试验方法

1997-12-25

现行

ISO 13924-2000

Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
塑料管道和配件——PE/金属过渡配件、PE攻丝三通和PE分支鞍座的弯曲拉伸循环试验

2000-03-23

现行

DIN EN 12119

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
塑料管道系统.聚乙烯（PE）阀门.耐热循环试验方法；德文版EN 12119:1997

1997-08-01

现行

BS EN 12119-1997

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling
塑料管道系统 聚乙烯（PE）阀门 耐热循环试验方法

1997-12-15

现行

UNE-EN 12119-1997

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING.
塑料管道系统 聚乙烯（PE）阀门 耐热循环的试验方法

1997-11-26

现行

DIN 3588-1-DRAFT

Draft Document - Gas Tapping Tees - Part 1: Tapping valves for polyethylene gas pipe systems - Requirements and Tests
文件草案.气体分接三通.第1部分:聚乙烯气体管道系统的分接阀.要求和试验

2020-12-01

现行

BS EN 12100-1998

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
塑料管道系统 聚乙烯（PE）阀门 支架间抗弯曲性的试验方法

1998-02-15

现行

UNE-EN 12100-1998

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO BENDING BETWEEN SUPPORTS.
塑料管道系统 聚乙烯（PE）阀门 支架间抗弯曲性的试验方法

1998-05-07

现行

BS EN 12106-1998

Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
塑料管道系统 聚乙烯（PE）管 施加挤压后抗内压的试验方法

1998-02-15

现行

UNE-EN 12106-1998

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF.
塑料管道系统 聚乙烯（PE）管 施加挤压后耐内压的试验方法

1998-05-07

现行

BS EN 1680-1997

Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
塑料管道系统 聚乙烯（PE）管道系统用阀门 操作机构弯曲前后密封性的试验方法

1997-07-15

现行

UNE-EN 1680-1997

PLASTICS PIPING SYSTEMS. VALVES FOR POLYETHYLENE (PE) PIPING SYSTEMS. TEST METHOD FOR LEAKTIGHTNESS UNDER AND AFTER BENDING APPLIED TO THE OPERATING MECHANISM.
塑料管道系统 聚乙烯（PE）管道系统用阀门 操作机构弯曲前后密封性的试验方法

1997-11-11

现行

ISO 4059-1978

Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
聚乙烯（PE）管——机械管道连接系统中的压降——试验方法和要求

1978-09-01

现行

DIN EN 1680

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
塑料管道系统.聚乙烯（PE）管道系统用阀门.操作机构弯曲时和弯曲后的密封性试验方法；德文版EN 1680:1997

1997-03-01

现行

ISO 18488-2015

Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
管道系统用聚乙烯（PE）材料.与缓慢裂纹扩展有关的应变硬化模量的测定.试验方法

2015-08-20

现行

BS ISO 18488-2015

Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
管道系统用聚乙烯（PE）材料 测定与缓慢裂纹扩展相关的应变硬化模量 试验方法

2015-08-31

现行

AS/NZS 1462.25-2005

Methods of test for plastics pipes and fittings, Method 25: Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method
塑料管道和配件的试验方法 方法25:聚乙烯（PE）树脂缓慢裂纹扩展的测定.缺口恒定韧带应力（NCLS）法

2005-09-30