警告-使用本文件的人员应熟悉正常的实验室实践。本文件并非旨在解决与其使用相关的所有安全问题（如有）。用户有责任建立适当的安全和健康实践，并确定任何国家监管条件的适用性。本文件规定了一种测试方法，用于测量剥离两层用橡胶粘合的织物或一层橡胶和一层粘合在一起的织物所需的力。 该方法适用于铺层表面近似平面或内径大于约50 mm的圆柱体形式。当铺层表面包含锐弯、角度或切割试样时不能排除的其他严重不规则时，该方法不适用。交叉引用:ISO 5893:2019ISO 18899:2013ISO 6133:2015ISO 23529ISO 252ISO 2411购买本文件时提供的所有当前修订版均包含在购买本文件中。

WARNING — Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any national regulatory conditions.This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together. The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.Cross References:ISO 5893:2019ISO 18899:2013ISO 6133:2015ISO 23529ISO 252ISO 2411All current amendments available at time of purchase are included with the purchase of this document.