1.1 本指南为现场安全工程师提供了帮助，以选择设计现场特定的焊丝物理安全周界屏障所需的适当组件。 1.2 本标准并非旨在解决与其使用相关的所有实物保护安全问题（如有）。标准用户有责任确定所需物理保护的适当设计水平，并确定监管要求或限制的适用性。 1.3 规格 F2453 将与本指南一起使用。 1.4 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。第7节“危险”中给出了一些具体的危险说明。

1.1 This guide provides assistance for the site security engineer to select the proper components required to design a site-specific, welded-wire physical security perimeter barrier. 1.2 This standard does not purport to address all of the physical protection security concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish the appropriate design level of physical protection required and determine the applicability of regulatory requirements or limitations. 1.3 Specification F2453 is to be used in conjunction with this guide. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Hazards.