BS EN 10169:2022-连续有机涂层（线圈涂层）扁钢产品.交货技术条件-国家数字标准馆

现行 BS EN 10169:2022

到馆阅读

收藏跟踪

购买正版

Continuously organic coated (coil coated) steel flat products. Technical delivery conditions 连续有机涂层（线圈涂层）扁钢产品.交货技术条件

发布日期： 2022-05-11

                本文件规定了连续有机涂层（线圈涂层）扁钢产品的要求。它特别规定了性能要求。涵盖的产品包括宽带、从宽带上切割的薄板、狭缝宽带、宽度小于600 mm的轧制带材和切割长度（从薄板或带材）。注:国家规定可以建立本文件要求的涂料性能与研究中相关建筑所需的室外大气和环境之间的关系。本文件不适用于由以下材料制成的连续有机涂层平板产品:锡磨机产品电工钢。

This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).NOTE National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.This document is not applicable to continuously organic coated flat products made of:- tin mill products;- electrical steels.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
连续有机涂层（线圈涂层）扁钢产品.第2部分:建筑外部应用产品

Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
连续有机涂层（线圈涂层）扁钢产品第3部分:建筑内部应用产品

UNE-EN 10169-2-2007

Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
连续有机涂层（线圈涂层）扁钢产品.第2部分:建筑外部应用产品

UNE-EN 10169-3-2007

Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
连续有机涂层（线圈涂层）扁钢产品第3部分:建筑内部应用产品

UNE-EN 10169-1-2005

Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
连续有机涂层（线圈涂层）扁钢制品.第1部分:一般信息（定义、材料、公差、试验方法）

Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
连续有机涂层（线圈涂层）扁钢制品.第1部分:一般信息（定义、材料、公差、试验方法）

UNE-EN 10346-2010

Continuously hot-dip coated steel flat products - Technical delivery conditions
连续热浸镀锌扁钢产品.交货技术条件

BS EN 10346-2015

Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
用于冷成型的连续热浸镀锌扁钢产品交货技术条件

BS EN 10271-1999

Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
电解锌镍（ZN）涂层扁钢产品交货技术条件

Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
电解锌镍（ZN）涂层扁钢产品.交货技术条件；德文版EN 10271:1998

UNE-EN 10271-1999

ELECTROLYTICALLY ZINC-NICKEL (ZN) COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS.
电解锌镍（ZN）涂层扁钢产品.交货技术条件

Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
连续热浸铅合金（terne）涂层冷还原碳钢扁钢产品

BS EN 10152-2017

Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
冷成型用电解镀锌冷轧扁钢制品交货技术条件

UNE-EN 10152-2010

Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
冷成型用电解镀锌冷轧扁钢制品.交货技术条件

Commission Decision No 2113/2000/ECSC of 5 October 2000 initiating a 'new exporter' review of Decision No 283/2000/ECSC imposing a definitive anti-dumping duty on imports of certain flat rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, in coils, not further worked than hot-rolled, originating, inter alia, in India, repealing the duty with regard to imports from one exporter in this country and
委员会2000年10月5日第2113/2000/ECSC号决定启动了对第283/2000/ECSC号决定的“新出口商”审查该决定对原产于印度的某些宽度为600 mm或以上、未包层、未电镀或涂层、成卷、未经热轧进一步加工的铁或非合金钢扁轧产品的进口征收确定反倾销税废除从该国一个出口商进口的关税以及

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统