本规范规定了使用固态电路输入元件与执行与控制系统应用相关的开关功能的机电继电器组合的继电器的一般要求（见6.1）。这些继电器设计用于在触点额定值高达1安培交流电（ac）或直流电（dc）的低功率和中等功率开关电路中运行。在本文规定的额定负载条件下，基于+125åC的100000次循环，故障率水平被确定为90%的鉴定置信水平和60%的鉴定维持置信水平。 不包括延时继电器。注意:使用任何低于额定线圈电压的线圈电压都会影响继电器的工作。注意:拾取、保持和跌落电压仅用于测试目的，不得用作设计标准。有关其他应用和注意信息，请参阅6.1。

This specification establishes the general requirements for relays that use a combination of solid state circuit input elements functioning with an electro-mechanical relay that performs the switching functions associated with control system applications (see 6.1). These relays are designed to operate in low and medium power switching circuits with contact ratings up to 1 ampere alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125å¡C under rated load conditions specified herein. Excludes time delay relays. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.