ISO 3245:2015-滚动轴承 - 带拉拔杯和无内圈的滚针轴承 - 边界尺寸几何产品规格（Gps）和公差值-国家数字标准馆

废止 ISO 3245:2015

到馆阅读

收藏跟踪

购买正版

Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 - 带拉拔杯和无内圈的滚针轴承 - 边界尺寸几何产品规格（Gps）和公差值

发布日期： 2015-12-14

ISO 3245:2015规定了无内圈拉制杯形滚针轴承的外形尺寸和首选尺寸，以及最小倒角尺寸限制。还规定了带有一个封闭端的轴承的封闭端厚度尺寸。
此外，还规定了滚针补孔直径的尺寸公差和拉制杯宽度的公差。
附录A中给出了轴滚道和壳体孔公差的信息值。

ISO 3245:2015 specifies the boundary dimensions and preferred dimensions to be used for drawn cup needle roller bearings without inner ring as well as the minimum chamfer dimension limits. Also specified are the closed end thickness dimensions for bearings with one closed end.
In addition, dimensional tolerances for the needle roller complement bore diameter and tolerances for the drawn cup width are specified.
Informative values for the tolerances for shaft raceway and housing bore are given in Annex A.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 21.100.20轴承 - 滚动轴承

关联关系

研制信息

归口单位： ISO/TC 4/SC 5

相似标准/计划/法规

滚动轴承无内圈冲压外圈滚针轴承外形尺寸
Rolling bearings－Needle roller bearings with drawn cup and without inner ring－Boundary dimensions

ROLLING BEARINGS. NEEDLE ROLLER BEARINGS, DRAWN CUP, WITHOUT INNER RING. METRIC SERIES. BOUNDARY DIMENSIONS AND TOLERANCES.
滚动轴承拉制外圈滚针轴承无内圈公制系列外形尺寸和公差

ROLLING BEARINGS. NEEDLE ROLLER BEARINGS, DRAWN CUP, WITHOUT INNER RING. METRIC SERIES. BOUNDARY DIMENSIONS AND TOLERANCES.
滚动轴承拉制外圈滚针轴承无内圈公制系列外形尺寸和公差

JIS B 1536-2-2008

Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring (Foreign Standard)
滚动轴承滚针轴承的外形尺寸和公差第2部分:无内环拉拔杯（国外标准）

구름 베어링 — 내륜이 없는 드로잉 컵형 니들 롤러 베어링 — 경계 치수 및 제품의 형상 명세(GPS)
滚动轴承 - 带拉拔杯和无内圈的滚针轴承 - 边界尺寸几何产品规格（Gps）和公差值

Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承.带拉制外圈和无内圈的滚针轴承.外形尺寸、几何产品规范（GPS）和公差值

GB/T 12764-2019

滚动轴承无内圈冲压外圈滚针轴承外形尺寸、产品几何技术规范（GPS）和公差值
Rolling bearings－Needle roller bearings with drawn cup and without inner ring－Boundary dimensions,geometrical product specifications（GPS）and tolerance values

MIL MS52141 Notice 1-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, CAGED, WITHOUT INNER RING OPEN AND CLOSED END, STANDARD TYPE
轴承滚柱滚针拉制外圈笼式无内圈开口和闭合端标准型

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, CAGED, WITHOUT INNER RING OPEN AND CLOSED END, STANDARD TYPE
轴承、滚柱、滚针、拉制外圈、保持架、无内圈开口端和封闭端、标准型

MIL MS52142A Notice 4-Revision

Bearing, Roller, Needle, Drawn Outer Ring, Full Complement, Without Inner Ring, Open End, Extra Precision Type
轴承滚子滚针拉制外圈完全互补无内圈开口端超精密型

MIL MS52142A Notice 2-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承滚子滚针拉制外圈全套无内圈开口端超精密型（取代MS52142）

MIL MS52142A Notice 3-Validation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承滚子滚针拉制外圈全套无内圈开口端超精密型（取代MS52142）

MIL MS17131H Notice 1-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)
轴承滚子滚针拉制外圈全套无内圈开口和封闭端标准型（取代MS17131G）

ASTM F2162-01(2016)

Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
轴承滚针针的标准规格:外圈完全补充无内圈开闭端标准型

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承、滚柱、滚针、拉制外圈、全套、无内圈、开口端、超精密型（取代MS52142）

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)
轴承、滚柱、滚针、拉制外圈、全套、无内圈、开式和闭式端、标准型（取代MS17131G）

MIL MS17131H Notice 2-Cancellation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)(S/S BY ASTM-F2162)
标准型（取代MS17131G）（由ASTM-F2162生产的全套、无内环、开口端和封闭端滚针轴承）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统