本欧洲标准适用于使用压力设备（固定或移动设备中使用的设备）使用车辆（M1和M2类别）对道路轮胎充气的轮胎压力表（TPG），并可能与配备车辆具有轮胎压力监测系统（TPMS），由此TPG可以由TPMS /车辆引导。 为了确定正确的轮胎充气量，本欧洲标准通过TPG和TPMS /车辆之间的高级信息，管理和控制系统的标准接口和数据交换格式，确定了TPG与TPMS /车辆的互操作性的要求和流程。该架构是开放和可扩展的，以支持不同级别的互操作性（从完全互操作性到完全手动）。 本欧洲标准没有定义通信协议（根据M/453欧洲授权专门制定的）。 本欧洲标准可适用于EN 12645修订版中引用的所有TPG类别。 司机/操作员被认为负责对参数和轮胎压力的验证。 该欧洲标准将适用于基础设施解决方案（V2I-I2V通信解决方案）的开发

This European Standard applies to the tyre pressure gauges (TPG) which operate using pressure equipment (devices used in fixed or mobile installations) to inflate the tyres of road using vehicles (M1 and M2 categories) and which may be capable of interacting with vehicles equipped with tyre pressure monitoring systems (TPMS) whereby the TPG may be steered by the TPMS/vehicle. To set the correct tyre inflation, this European Standard defines requirements and processes for the interoperability of TPG with TPMS/vehicle, through standardized interfaces and data exchange formats allowing advanced information, management and control systems between TPG and TPMS/vehicle. The architecture is open and scalable to support the different levels of interoperability (from full interoperability to fully manual). This European Standard does not define communication protocols (works specifically made under M/453 European mandate). This European Standard may be applied to all TPG categories referenced in the revision of EN 12645. The driver/operator is considered as being responsible for the validation of the parameters and tyre pressure. This European Standard will be applicable upon development of Infrastructure solution (V2I-I2V communication solutions).