CSA序言这是CSA E62660-2《电动道路车辆推进用二次锂离子电池——第2部分:可靠性和滥用试验》的第二版，采用了相同名称的IEC（国际电工委员会）标准62660-2（第二版，2018-12），但存在加拿大偏差。它取代了2015年发布的前一版本，即CAN/CSA-E62660-2（采用IEC 62660-2:2010）。它是CSA集团根据《加拿大电气规范》第二部分发布的一系列标准之一。本标准拟与CSA E62660-1《电动道路车辆推进用二次锂离子电池-第1部分:性能试验》（采用IEC 62660-1:2018，加拿大偏差）结合使用。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。 CSA集团已将其作为加拿大国家标准发布。范围IEC 62660的本部分规定了观察用于推进电动汽车（包括电池电动汽车（BEV）和混合动力电动汽车（HEV））的二次锂离子电池和电池组的可靠性和滥用行为的试验程序。注1:插电式混合动力电动汽车（PHEV）驱动用二次锂离子电池可根据电池系统设计，根据电池制造商和客户之间的协议，通过BEV应用或HEV应用程序进行测试。本文件规定了用于推进电池和混合动力电动汽车的锂离子电池基本特性的标准试验程序和条件。 这些测试对于获取用于各种电池系统和电池组设计的锂离子电池的可靠性和滥用行为的基本数据是必不可少的。本文件提供了用于电池系统或电池组设计的测试结果描述的标准分类。注2:根据电池制造商和客户之间的协议，电池块可用作电池的替代品。注3:IEC 62660-3[3]规定了电动汽车用锂离子电池的安全要求。

CSA PrefaceThis is the second edition of CSA E62660-2, Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62660-2 (second edition, 2018-12). It supersedes the previous edition, published in 2015 as CAN/CSA-E62660-2 (adopted IEC 62660-2:2010). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code.This Standard is intended to be used in conjunction with CSA E62660-1, Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing (adopted IEC 62660-1:2018, with Canadian deviations). This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.ScopeThis part of IEC 62660 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV).NOTE 1 Secondary lithium-ion cells used for propulsion of plug-in hybrid electric vehicles (PHEV) can be tested by the procedure either for BEV application or HEV application, according to the battery system design, based on the agreement between the cell manufacturer and the customer. This document specifies the standard test procedures and conditions for basic characteristics of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion cells for use in various designs of battery systems and battery packs. This document provides standard classification of description of test results to be used for the design of battery systems or battery packs.NOTE 2 Cell blocks can be used as an alternative to cells according to the agreement between the cell manufacturer and the customer.NOTE 3 The safety requirements of lithium-ion cells for electric vehicle application are defined in IEC 62660-3 [3].