SAE J2337/3_201701-流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和插头.第3部分:端口插头要求、尺寸、设计和试验方法（2017年1月）-国家数字标准馆

现行 SAE J2337/3_201701

到馆提醒

收藏跟踪

购买正版

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017) 流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和插头.第3部分:端口插头要求、尺寸、设计和试验方法（2017年1月）

发布日期： 2017-01-04

SAE J2337的本部分规定了八个使用锥形密封的塞子的尺寸、设计和性能要求，以确保设计系数为4到1的防漏性能。

This part of SAE J2337 specifies dimensions, design, and performance requirements for eight plugs using a conical seal to insure leak proof performance with a design factor of 4 to 1.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Pneumatic fluid power — Connections — Ports and stud ends
气压传动.连接.端口和螺柱端

GB/T 14038-2008

气动连接气口和螺柱端
Pneumatic fluid power - Connections - Ports and stud ends

GB/T 19674.1-2005

液压管接头用螺纹油口和柱端--螺纹油口
Connections for general use and fluid power Ports and stud ends with thread-Threaded port

GB/T 19674.3-2005

液压管接头用螺纹油口和柱端金属对金属密封柱端（B型）
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B)

GB/T 19674.2-2005

液压管接头用螺纹油口和柱端--填料密封柱端（A型和E型）
Connections for general use and fluid power Ports and stud ends with thread-Stud ends with elastomeric sealing(A type and type E)

BS EN ISO 9974-1-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

GB/T 2878.1-2011

液压传动连接带米制螺纹和O形圈密封的油口和螺柱端第1部分：油口
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports

SAE J2337/2_201702

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和塞子.第2部分:螺柱端要求、尺寸、设计和试验方法（稳定:2017年2月）

BS EN ISO 1179-1-2013

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接端口和螺柱端部采用ISO 228-1螺纹采用弹性体或金属对金属密封

Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)
气压传动.连接.端口和螺柱端（ISO 16030-2001+Amd.1-2005）

GB/T 43077.4-2023

液压传动连接普通螺纹平油口和螺柱端第4部分：六角螺塞
Connections for hydraulic fluid power—Ports and stud ends with general threads—Part 4: Hex plugs

BS EN ISO 9974-2-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with elastomeric sealing (type E)
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

ISO 9974-1-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 261弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

ISO 11926-3-1995

Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端

BS EN ISO 9974-3-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with metal-to-metal sealing (type B)
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

SAE J1926/3_202305

Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
带ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接第3部分:轻型（L系列）螺柱端

SAE J1926/2_202303

Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
具有ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接件.第2部分:重型（S系列）螺柱端

ISO 11926-2-1995

Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端

ISO 1179-1-2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

ISO 9974-2-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第2部分:弹性体密封螺柱端（E型）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统