现行

MIL MS51891 Notice 1-Validation

PLUG, TUBE FITTING, THREADED, FLARELESS TYPE, HYDRAULIC
插头管接头螺纹Flareless型液压

1987-02-12

现行

MIL MS51891A

PLUG, TUBE FITTING, THREADED, FLARELESS TYPE, HYDRAULIC
液压无扩口式螺纹卡套管接头插头

2018-07-25

现行

MIL MS51825H Amendment 1

SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
套筒 铆接 卡套管接头 无扩口型 液压

2008-06-05

现行

MIL MS51825J

SLEEVE, CLINCH, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
液压无扩口式管接头锁紧套筒

2018-05-24

现行

MIL MS51890B Amendment 1

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP ASSEMBLY, TUBE, FLARELESS TYPE, HYDRAULIC
配件 液压管 37度扩口和无扩口 钢制；液压无扩口式管盖组件

2019-01-29

现行

MIL MS51890C

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP ASSEMBLY, TUBE, FLARELESS TYPE, HYDRAULIC
37度扩口和无扩口液压管配件 钢制；无扩口式液压管盖组件

2020-11-20

现行

MIL MS51890A Notice 1-Inactivation

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP ASSEMBLY, TUBE, FLARELESS TYPE, HYDRAULIC (SUPERSEDING MS51890)
配件 液压管 37度扩口和无扩口 钢制；液压无扩口式管帽组件（取代MS51890）

1999-08-17

现行

MIL MS51825G Notice 1-Inactivation 1

SLEEVE, CLINCH, TUBE FITTING, FLARELESS TYPE, HYDRAULIC (SUPERSEDING MS51825F)
液压无扩口式卡套管接头铆接套管（取代MS51825F）

1999-08-17

现行

SAE AIR310A

Fittings, Catalog of Flared, Flareless, Pipe Threaded, Port, Hose, and Other Type Tube Standard Connectors
配件、扩口、无扩口、管螺纹、端口、软管和其他类型的管标准接头目录

2013-01-02

现行

QPL QPL-AMS-P-5510-1

PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 °F TO 160 °F)
I型液压预成型直螺纹管件凸台填料（-65°F至160°F）

2005-07-13

现行

QPL QPL-AMS-P-5510-1

PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 °F TO 160 °F)
I型液压预成型直螺纹管件凸台填料（-65°F至160°F）

2005-07-13

现行

SAE AMSP5510B

O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) (Stabilized: Apr 2023)
O型环 预制 直螺纹卡套管接头凸台 I型液压（-65至160°F）（2023年4月稳定）

2023-04-12

现行

MIL MIL-P-81716 Notice 1-Inactivation

PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC ( MINUS 65 DEG F TO PLUS 275 DEG F )
预成型直螺纹卡套管接头凸台填料 II型液压（-65°F至+275°F）

1997-06-16

现行

MIL MIL-P-81716

PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC ( MINUS 65 DEG F TO PLUS 275 DEG F )
II型液压直螺纹管件凸台预制填料（负65华氏度至正275华氏度）

1969-02-14

现行

MIL MS28767A Notice 1-Validation

VALVE, SHUTTLE, HYDRAULIC, INTERNAL-THREAD, TUBE FITTING OUTLET, 3,000 PSI, TYPE II SYSTEMS (ASG) (SUPERSEDING MS28767)(S/S BY MS28767B)
液压梭阀 内螺纹 管接头出口 3,000磅/平方英寸 II型系统(ASG)（取代MS28767）（S/S为MS28767B）

1987-08-25

现行

MIL MS28767A Notice 3-Validation

VALVE, SHUTTLE, HYDRAULIC, INTERNAL-THREAD, TUBE FITTING OUTLET, 3,000 PSI, TYPE II SYSTEMS (ASG) (SUPERSEDING MS28767)(S/S BY MS28767B)
3000磅/平方英寸 II型系统（ASG）（取代MS28767）（由MS28767B代替S/S）

2004-02-04

现行

MIL MS28767A Notice 2-Inactivation

VALVE, SHUTTLE, HYDRAULIC, INTERNAL-THREAD, TUBE FITTING OUTLET, 3,000 PSI, TYPE II SYSTEMS (ASG) (SUPERSEDING MS28767)(S/S BY MS28767B)
3000磅/平方英寸 II型系统（ASG）（取代MS28767）（由MS28767B代替S/S）

1999-04-30

现行

MIL MS28767B

VALVE, SHUTTLE, HYDRAULIC, INTERNAL THREAD, TUBE FITTING OUTLET, 3000 PSI, TYPE II SYSTEMS (SEE BASE FOR INACTIVATION NOTICE)(SUPERSEDING MS28767A)
阀门 梭式 液压 内螺纹 管件出口 3000磅/平方英寸 II型系统（失活通知见基础）（取代MS28767A）

2006-08-08

现行

ASD-STAN prEN 6126

Aerospace series - Fitting end, 24deg internal cone, external thread, flareless type, size -32 - Tube diameter D = 2 inches (D = 50,8 mm) - Extra fine thread pitch - Inch series - Design standard
航空航天系列.尺寸为32的无扩口型24°内锥外螺纹接头端部.管径D=2英寸（D=50.8mm）.特细螺纹节距.英寸系列.设计标准

2005-01-31

现行

BS EN 6126-2018

Aerospace series. Fitting end, 24 ° internal cone, external thread, flareless type, size 32 tube diameter D=2 inches (D=50,8 mm) extra fine thread pitch inch series. Inch series. Design standard
航空航天系列 安装端 24°内锥 外螺纹 无扩口型 尺寸32管直径D=2英寸（D=50.8毫米）特细螺纹螺距英寸系列 英寸系列 设计标准

2018-08-15