1.1本指南描述了具有完整磨损表面的冷液体应用弹性防水膜系统的设计和安装。规范C 957中规定了本指南所指的低温液体应用弹性防水膜 . 1.2 地面混凝土板 — 地面上混凝土板的上表面防水存在特殊问题，因为负静水压力可能导致与基材的粘结损失。考虑这些问题超出了本指南的范围。如果存在这种情况，请咨询膜制造商以获得建议。 1.3对本指南具有管辖权的委员会不知道有任何类似的ISO标准。 1.4以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 具体危险说明见15.4中的注释。 ====意义和用途====== 本指南分为两个部分，提供冷液体使用的设计和规范指南- 在人员、车辆或设备占用的建筑区域内，使用带有整体磨损表面的弹性薄膜对建筑甲板进行防水处理。 第5-11节“设计注意事项”的目的是提供信息和设计指南，其中将使用具有整体磨损表面的防水膜。其余章节旨在为买方和卖方在合同文件中的使用提供最低指导规范。 如果目前的技术水平使得特定条件的标准尚未牢固确立或有许多需要考虑的变量，请参考第5节的适用部分- 11这涵盖了特定的关注领域。第16节描述了膜的维修、修复和更换。 设计注意事项 顶部

1.1 This guide describes the design and installation of cold liquid-applied elastomeric waterproofing membrane systems that have an integral wearing surface. The cold liquid-applied elastomeric waterproofing membrane (membrane) to which this guide refers is specified in Specification C 957 . 1.2 Concrete Slab-on-Grade — Waterproofing the upper surface of a concrete slab on grade presents special problems due to the possibility of negative hydrostatic pressure causing loss of bond to the substrate. Consideration of these problems is beyond the scope of this guide. Consult the membrane manufacturer for recommendations when this situation exists. 1.3 The committee having jurisdiction for this guide is not aware of any similar ISO standard. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Note in 15.4. ====== Significance And Use ====== This guide is divided into two sections which provide design and specification guidelines for the use of a cold liquid-applied elastomeric membrane with integral wearing surface for waterproofing building decks in building areas to be occupied by personnel, vehicles, or equipment. The intent of Sections 5-11, Design Considerations, is to provide information and design guidelines where a waterproofing membrane with integral wearing surface is to be used. The intent of the remaining sections is to provide minimum guide specifications for the use of the purchaser and the seller in contract documents. Where the state of the art is such that criteria for a particular condition is not as yet firmly established or has numerous variables that require consideration, reference is made to the applicable portion of Sections 5-11 that covers the particular area of concern. Section 16 describes the repair, rehabilitation, and replacement of the membrane. DESIGN CONSIDERATIONS Top