首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D1719-11(2019)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Isobutyl Alcohol<sup>,</sup> 异丁醇的标准规范
发布日期: 2019-04-01
1.1 本规范涵盖用于油漆、清漆、油漆和相关产品的异丁醇。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 以下内容适用于本标准中的所有规定限值:为了确定是否符合本标准,应根据修约实践方法,将观察值或计算值修约到用于表示规范限值的最后一个右手数字中的“最接近的单位” E29年 . 1.4 有关具体的危险信息和指导,请参阅本规范中所列材料的供应商材料安全数据表。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers isobutyl alcohol for use in paint, varnish, lacquer, and related products. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheets for materials listed in this specification. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D01.35
相似标准/计划/法规
现行
ASTM D770-11(2019)
Standard Specification for Isopropyl Alcohol,
异丙醇的标准规范
2019-04-01
现行
ASTM D1007-11(2019)
Standard Specification for sec-Butyl Alcohol,
丁醇的标准规范
2019-04-01
现行
ASTM D331-11(2019)
Standard Specification for 2-Ethoxyethanol,
2-乙氧基乙醇的标准规范
2019-04-01
现行
ASTM D2694-05(2019)
Standard Specification for Diethylene Glycol,
二甘醇的标准规范
2019-04-01
现行
ASTM D740-11(2019)
Standard Specification for Methyl Ethyl Ketone,
甲乙酮的标准规范
2019-04-01
现行
BS ISO/IEC 23360-3-3-2021
Linux Standard Base (LSB)-Desktop specification for IA64 (Itanium TM) architecture
Linux标准库(LSB)
2021-10-29
现行
ASTM C1462-21
Standard Specification for Uranium Metal Enriched to Less Than 20 % 235U
浓缩至20%以下的金属铀标准规范 % 235U
2021-10-01
现行
ASTM F3458-21
Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index ≥50 kG2 mm2)
含有小的、松散的、强大的磁铁(具有通量指数)的成人磁铁组的营销、包装和标签的标准规范≥50 千克2 毫米2
2021-02-15
现行
ASTM C996-20
Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 %  235U
浓缩至小于5%的六氟化铀标准规范 235U
2020-03-01
现行
ASTM F2919/F2919M-12(2018)
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
面板中具有可变网格图案或大于6 in.2[3871 mm2]网格的焊接钢丝网围栏织物(金属涂层或聚合物涂层)的标准规范
2018-03-01
现行
ASTM F2453/F2453M-14(2019)
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2  [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
6 in.2和#x2009网格用焊接钢丝网围栏织物(金属涂层或聚合物涂层)的标准规范[3871 mm2]或更小 在面板或卷中 具有均匀的网格
2019-05-01
现行
ASTM C1334-05(2022)
Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
含铀氧化物的标准规范 235U含量小于5 % 用于转化为核级二氧化铀之前的溶解
2022-07-01