BS PD 8010-2:2015+A1:2016给出了设计建议和指南， 材料的选择、规格和使用、施工、安装、测试， 钢制海底设备的调试、运行、维护和废弃 海上、近岸和陆地环境中的管道。使用指南 给出了柔性复合管道的设计方法。其目的不是替换或复制液压、机械或结构 设计手册。PD 8010的本部分适用于拟用于 碳氢化合物液体、碳氢化合物气体、二氧化碳和二氧化碳的运输 其他气体、液体和气体分为两部分- 相流、液基泥浆和水。注1尽管主要涉及与石油相关的海底管道 在天然气行业，PD 8010-2可能会在更广泛的海上应用 活动。PD 8010本部分涵盖的管道系统范围如图所示 如图1所示。PD 8010的本部分适用于水深以上的管道 注2:在深水中，其他国际规范，如“DNV-OS-F101”适用 可应用的交叉引用:ASME B16。5ASME B16。9月16日。11ASME B16。20ASME B16。21ASME B16。47ASME B31。3ASME B31。8ASME BPVC-VIII-1ASME BPVC-IXASTM A193/A193MASTM A194/A194MASTM A262ASTM A264ASTM A265ASTM A312ASTM A320/A320MASTM A790ASTM B423ASTM B44ASTM C171BS 1881BS 3293BS 3518- 4）bebebes 4515）bes 4515）bebes 4515）bebes 4515）bes 4515）bebes 4515）bebes 4515）bes 4515）bebes 4515）bes 4515）bes 4515）bes 4515）bebes 4515）bes 4515）bes 4515）bes 4515）bes 4515（2）bes 452（B B B B B 488 8 8（B B B B B B B B B B（B B B B）s 488 8 8 8 8 8 8（B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 488 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 B B B B B B B B B B B B B B B B B B B B B B B B B B 448 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 44BS EN ISO 13628-2BS EN ISO 13628-15BS EN ISO 14713BS EN ISO 15156BSEN ISO 15607BS EN ISO 15607BS EN ISO 15607BS EN ISO 15607BS EN ISO 15607BS EN ISO 15614BS EN ISO 15614BS EN ISO 1515653BS EN ISO 1515589-2BS ISO 14143BS ISO 7005-1BS ISO 10474BS ISO 12107ISO 14313 ISO 15590-1ISO 15590-2ISO 15590-3ISO/ISO 1515590-3ISO/DIS 13628-141414PD 5500API 5L:2012API 5LPI 5LCAPI 5LD6AAPI 17BAPI 17JAPI 1104RP 17BAPI 17AWWA6025- OS-F101DNV-RP-F103DNV-RP-F106MSS SP 44NACE MR0175ASTM E1049-85（1997）BS 6349-1-1BS EN 752BS EN 1008BS EN 1992-1-1BS EN 12390-3BS EN 12504-1BS EN 14161BS EN ISO 9000BS EN ISO 9001BS EN ISO 13628-5BS EN ISO 14001BS EN ISO 80000-1ISO 13623PD 8010-1PD 8010-3PD 8010-5API RP 14EAPI579DNV-RP-B401DNV-RP-F102DNV-RP-F105DNV-RP-F107DNV-RP-F108DNV-RP-F109DNV-RP-F110DNV-RP-F111DNV-RP-F204DNV-RP-J202DNV-RP-O501NACE TM0177NACE TM0284《2007年海岸保护法》建造（设计和管理）条例大陆防护林公司修订如下:2016年11月。 修订并替换PD 8010-2:2015

BS PD 8010-2:2015+A1:2016 gives recommendations for and guidance on the design, selection, specification and use of materials, construction, installation, testing, commissioning, operation, maintenance and abandonment of steel subsea pipelines in offshore, nearshore and landfall environments. Guidance on the use of flexible composite pipelines is also given.It is not intended to replace or duplicate hydraulic, mechanical or structural design manuals.This part of PD 8010 is applicable to subsea pipelines intended for the conveyance of hydrocarbon liquids, hydrocarbon gases, carbon dioxide and other gases, liquids and gases in two-phase flow, fluid-based slurries and water.NOTE 1 Although primarily concerned with subsea pipelines associated with the oil and gas industry, PD 8010-2 is likely to have application to a wider range of offshore activities.The extent of pipeline systems covered by this part of PD 8010 is shown in Figure 1. This part of PD 8010 is applicable to pipelines in water depths up to 500 m.NOTE 2 In deeper water, other international codes such as "DNV-OS-F101" are applicable.Cross References:ASME B16.5ASME B16.9ASME B16.11ASME B16.20ASME B16.21ASME B16.47ASME B31.3ASME B31.8ASME BPVC-VIII-1ASME BPVC-IXASTM A193/A193MASTM A194/A194MASTM A262ASTM A264ASTM A265ASTM A312ASTM A320/A320MASTM A790ASTM B423ASTM B444ASTM C171BS 1881BS 3293BS 3518-1BS 3518-3BS 3799BS 4482BS 4483BS 4515-1BS 4515-2BS 4882BS 6349-1-4BS 6374-3BS 6374-4BS 7371-12BS 7448BS 7608BS 7910BS EN 197-1BS EN 1991-1-4BS EN 10204BS EN 10224BS EN 10244-2BS EN 10311BS EN 12620BS EN 13480-3BS EN ISO 148-1BS EN ISO 1461BS EN ISO 3183:2012BS EN ISO 8501BS EN ISO 8502BS EN ISO 8503BS EN ISO 9606-1BS EN ISO 12944BS EN ISO 13628-2BS EN ISO 13628-15BS EN ISO 14713BS EN ISO 15156BS EN ISO 15607BS EN ISO 15609BS EN ISO 15610BS EN ISO 15614BS EN ISO 15653BS EN ISO 15589-2BS ISO 1143BS ISO 7005-1BS ISO 10474BS ISO 12107ISO 14313ISO 15590-1ISO 15590-2ISO 15590-3ISO/DIS 13628-14PD 5500API 5L:2012API 5LCAPI 5LDAPI 6AAPI 17JAPI 1104API RP 17BAPI RP 170AWWA C205AWWA C602DNV-OS-F101DNV-RP-F103DNV-RP-F106MSS SP 44NACE MR0175ASTM E1049-85(1997)BS 6349-1-1BS EN 752BS EN 1008BS EN 1992-1-1BS EN 12390-3BS EN 12504-1BS EN 14161BS EN ISO 9000BS EN ISO 9001BS EN ISO 9004BS EN ISO 13628-5BS EN ISO 14001BS EN ISO 80000-1ISO 13623PD 8010-1PD 8010-3PD 8010-4PD 8010-5API RP 2A WSDAPI RP 5L1API RP 5LWAPI RP 14EAPI RP 579DNV-RP-B401DNV-RP-F102DNV-RP-F105DNV-RP-F107DNV-RP-F108DNV-RP-F109DNV-RP-F110DNV-RP-F111DNV-RP-F204DNV-RP-J202DNV-RP-O501NACE TM0177NACE TM0284Coast Protection Act 1949Construction (Design and Management) Regulations 2007Continental ShelfIncorporates the following:Amendment, November 2016. Amends and replaces PD 8010-2:2015