BS PD 8010-1:2015+A1:2016给出了设计建议和指南， 材料的选择、规格和使用、路线、土地征用、， 建筑、安装、测试、运行、维护和废弃 用钢建造的陆地管道系统。本部分的原则 PD 8010适用于新管道和现有管道的重大改造。其目的不是替换或复制液压、机械或结构 设计手册。PD 8010的本部分适用于拟用于输送天然气的管道 石油、天然气、二氧化碳和其他具有危险性质的物质 具有爆炸性、易燃性、毒性、反应性，或易对人身或身体造成伤害 为了保护环境。它涵盖了在不同温度下运行的管道 温度范围为-25°C和+120°C（含）。PD 8010本部分涵盖的管道系统范围如图所示 如图1所示。注:附录A显示了陆上石油和天然气管道系统的全部范围 本部分包含在PD 8010中。PD 8010的这一部分没有给出海底管道的建议，因为 都包含在PD 8010-2中。交叉引用:ASME B16。5ASME B16。9月16日。11ASME B16。20ASME B16。21ASME B16。47ASME B31。3ASME B31。4.1）a1 93/A194/A194/A193/A193/A193/A193/A193/A19393/A19393/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A193/A19393/93/A19393/A193/A193/A193/10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10米ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM 13 13 13 13 13 13 13 ASTM ASTM ASTM ASTM ASTM ASTM ASTM A312 ASTM A312 ASTM A312 ASTM A312 ASTM A312 ASTM A312 12 ASTM A312 12 12 12 12 ASTM A312 12 12 ASTM A312 12 12 12 12 12 12 ASTM A312 12 12 ASTM A312 ASTM A312 12 ASTM A312 ASTM A320/A320/A320/A320/A320/A320/A320/A320/-1BS EN ISO 15156BS EN ISO 15607BS EN ISO 15609BS EN ISO 15610BS EN ISO 15614BS EN ISO15653BS EN ISO 21809- 4.B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 16-1亿欧元10216-2BS EN 10217-1BS EN 10217-2BS EN 10217-5BS EN 12007BS EN 14161BS EN ISO 9000BS EN ISO 9001BS EN ISO 14001BS EN ISO 16708BS EN ISO 80000- 1BS ISO 15649DIN 30670ISO 13623PD 8010-2PD 8010-4PD 8010-5API 1102API RP 579API RP 5L1API RP 5LWDNV-OS-F101:2013DNV-RP-F110DNV-RP-J202IGEM/TD/1第5版增补1:2012ACE TM0284BS 3618-3BS 3618-8BS 5911-1BS 5949ISO 4488BS 6100-3BS 6164BS EN 295-7BS EN 815BS EN 12110BS EN 12111BS EN 12336DNB401-1DRP-2011DRP-2016702:ISO设计和施工管理《2007年放松管制（管道）令》（1999年）规定如下:2016年11月修订。 修订并替换PD 8010-1:2015

BS PD 8010-1:2015+A1:2016 gives recommendations for and guidance on the design, selection, specification and use of materials, routeing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel. The principles of this part of PD 8010 apply to new pipelines and major modifications to existing pipelines.It is not intended to replace or duplicate hydraulic, mechanical or structural design manuals.This part of PD 8010 is applicable to pipelines intended for the conveyance of oil, gas, carbon dioxide and other substances that are hazardous by nature of being explosive, flammable, toxic, reactive, or liable to cause harm to persons or to the environment. It covers pipelines operating at temperatures between a range of -25 °C and +120 °C inclusive.The extent of pipeline systems covered by this part of PD 8010 is shown in Figure 1.NOTE Annex A shows the full range of onshore oil and gas pipeline systems covered by this part of PD 8010.This part of PD 8010 does not give recommendations for subsea pipelines, which are covered in PD 8010-2.Cross References:ASME B16.5ASME B16.9ASME B16.11ASME B16.20ASME B16.21ASME B16.47ASME B31.3ASME B31.8ASME BPVC-VIII-1ASTM A193/A193M 12bASTM A194/A194M 13ASTM A312ASTM A320/A320M 11aASTM A790ASTM B423ASTM B444BS 3293BS 3518-1BS 3518-3BS 3799BS 4515-1BS 4515-2BS 4882BS 7448BS 7608BS 7910BS EN 10204BS EN 10224BS EN 13480-3BS EN 60079-10-1BS EN 60079-14BS EN 62305BS EN ISO 148-1BS EN ISO 3183:2012BS EN ISO 9606-1BS EN ISO 15156BS EN ISO 15607BS EN ISO 15609BS EN ISO 15610BS EN ISO 15614BS EN ISO 15653BS EN ISO 21809-1BS EN ISO 21809-2BS ISO 1143BS ISO 7005-1BS ISO 10474BS ISO 12107ISO 15589-1BS ISO 21809-4ISO 14313ISO 15590-1ISO 15590-2ISO 15590-3ISO 21809-3PD 5500PD 8010-3:2009+A1:2013API 5L:2012API 5LCAPI 5LDAPI 6AAPI RP 5L2IGEM/TD/1 Edition 5:2012MSS SP 44NACE MR0175NFPA 30ASTM C177ASTM E1049-85ASTM H518BS 4508BS 5306BS 5607BS 5839BS 6031BS 6349-1-4BS EN 437BS EN 1992-1-1BS EN 1594:2013BS EN 10216-1BS EN 10216-2BS EN 10217-1BS EN 10217-2BS EN 10217-5BS EN 12007BS EN 14161BS EN ISO 9000BS EN ISO 9001BS EN ISO 9004BS EN ISO 14001BS EN ISO 16708BS EN ISO 80000-1BS ISO 15649DIN 30670ISO 13623PD 8010-2PD 8010-4PD 8010-5API 1102API RP 579API RP 5L1API RP 5LWDNV-OS-F101:2013DNV-RP-F110DNV-RP-J202IGEM/TD/1 Edition 5 Supplement 1:2012NACE TM0284BS 3618-3BS 3618-8BS 5911-1BS 5911-120BS 5949ISO 4488BS 6100-3BS 6164BS EN 295-7BS EN 815BS EN 12110BS EN 12111BS EN 12336DNV-RP-B401:2010DNV-RP-F102:2011DNV-RP-F107:2010ISO 21467Construction (Design and Management) Regulations 2007Deregulation (Pipe-lines) Order 1999Electricity aIncorporates the following:Amendment, November 2016. Amends and replaces PD 8010-1:2015