前言:这是电动车辆电缆的统一NCE、CSA组和UL标准。它是NMX-J-738-ANCE、CSA C22.2 No.332和UL 2263的第一版。本协调标准由标准化与认证协会（ANCE）、CSA集团和美国保险商实验室有限公司（UL）编制。感谢技术协调小组委员会TC 20电线电缆在美洲国家电工标准协调方面所做的努力和提供的支持。本标准被认为适用于本标准规定范围内的合格评定。目前的墨西哥标准是由CT 20 Conductores从Comite de Normalizacion de la Asocicion de Normalizacion y Certificiation，A。 C、 ，CONANCE，与导电体制造商和用户合作。本标准由CSA电线产品技术委员会和CSA电气安全要求战略指导委员会管辖的CSA软线/设备和电器电线电缆小组委员会审查，并已由CSA技术委员会正式批准。本标准是根据加拿大标准委员会对加拿大国家标准的要求制定的。CSA集团已将其发布为加拿大国家标准。范围1.1概述本标准规定了额定值高达1000V AC和DC的电动车辆电缆的要求，这些电缆是车辆中携带的用于连接充电站、永久或临时连接电动车辆供电设备（EVSE）或用于连接为电动车辆供电的分支电路的电线组的一部分，反之亦然，以便根据CSA使用C22。 1、加拿大电气规范（CE规范），加拿大第一部分，NOM-001-SEDE，墨西哥的La Norma de Instalaciones Electricas（墨西哥电气规范[MEC]），以及美国的NFPA 70，国家电气规范（NEC）。1.2包括的产品本标准涵盖额定值为300V、600V和1000V交流和直流的耐阳光和耐油电动车辆电缆，以及满足电动车辆电缆（EV、EVE、EVJ、EVJT、EVT、EVJE）施工要求的60℃、75℃、90℃或105℃电缆。这些电缆可能包含数据、信号、通信和/或光纤电缆。

PrefaceThis is the harmonized ANCE, CSA Group, and UL standard for electric vehicle cable. It is the first edition of NMX-J-738-ANCE, CSA C22.2 No. 332, and UL 2263. This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE), CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Subcommittee, TC 20 Electrical Wires and Cables on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard.The present Mexican standard was developed by the CT 20 Conductores from the Comite de Normalizacion de la Asociacion de Normalizacion y Certificacion, A.C., CONANCE, with the collaboration of the manufacturers and users of electric conductors. This standard was reviewed by the CSA Subcommittee on Flexible Cords/Equipment and Appliance Wires and Cables, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with the Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.Scope1.1 GeneralThis standard specifies the requirements for electric vehicle cables rated up to 1000V AC and DC intended to be part of a cord set carried in the vehicle for connection to a charging station or for permanent or temporary connection to Electric Vehicle Supply Equipment (EVSE) or for connection to the branch circuit supplying the EVSE or vice versa for use in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas (Mexican Electrical Code [MEC]), in Mexico, and NFPA 70, National Electrical Code (NEC), in the United States.1.2 Products includedThis standard covers sunlight and oil resistant electric vehicle cables rated 300V, 600V and 1000V AC and DC, and 60 °C, 75 °C, 90 °C, or 105 °C cables meeting the construction requirements for Electric Vehicle cables designated EV, EVE, EVJ, EVJT, EVT, EVJE as appropriate. These cables may contain data, signal, communications and/or optical fiber cables.