BS ISO 1835:2018-起重用圆钢短链中等公差吊链 4级不锈钢-国家数字标准馆

现行 BS ISO 1835:2018

到馆提醒

收藏跟踪

购买正版

Round steel short link chains for lifting purposes. Medium tolerance sling chains. Grade 4, stainless steel 起重用圆钢短链中等公差吊链 4级不锈钢

发布日期： 2018-08-31

BS ISO 1835:2018规定了4级不锈钢中等公差吊链的要求，最好用于4级不锈钢吊链或其他起重用途。交叉引用:ISO 13385-1ISO 7500-1ISO 1834ISO 16143-2ISO 497ISO 1035-1ISO 16124ISO 3076ISO 15510ISO 2374ISO 4778ISO 3651-1ISO 3056ISO 4063ISO 3651-2购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS ISO 1835:2018 specifies the requirements for medium tolerance sling chains of grade 4 from stainless steel for use preferably in chain slings of grade 4 from stainless steel or for other lifting purposes.Cross References:ISO 13385-1ISO 7500-1ISO 1834ISO 16143-2ISO 497ISO 1035-1ISO 16124ISO 3076ISO 15510ISO 2374ISO 4778ISO 3651-1ISO 3056ISO 4063ISO 3651-2All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainless steel
起重用圆钢短链中等公差吊链 4级不锈钢

GB/T 24814-2023

起重用钢制短环链中等精度吊链 4级不锈钢
Round steel short link chains for lifting purposes—Medium tolerance sling chains—Grade 4, stainless steel

Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8
一般起重用圆钢短链——链式吊索的中公差吊索链——八年级

BS 10/30216796 DC

BS ISO 3076. Round steel short link chains for general lifting purposes. Medium tolerance sling chains for chain slings. Grade 8
BS ISO 3076 一般起重用圆钢短链链式吊索的中公差吊索链八年级

BS EN 818-3-1999+A1-2008

Short link chain for lifting purposes. Safety-Medium tolerance chain for chain slings. Grade 4
用于提升目的的短链安全

BS EN 818-2-1996+A1-2008

Short link chain for lifting purposes. Safety-Medium tolerance chain for chain slings. Grade 8
用于提升目的的短链安全

GOST EN 818-2-2017

Цепи стальные из круглых коротких звеньев для подъема грузов. Безопасность. Часть 2. Цепи стальные нормальной точности для стропальных цепей класса 8
用于提升用途的短链钢链安全第2部分中等公差钢链用于8级链条吊索

GOST EN 818-3-2017

Цепи стальные из круглых коротких звеньев для подъема грузов. Безопасность. Часть 3. Цепи стальные нормальной точности для стропальных цепей класса 4
用于提升用途的短链钢链安全第4部分链条吊索的中等公差钢链

GB/T 24816-2017

一般起重用钢制短环链吊链用8级中等精度链条
Round steel short link chains for general lifting purposes—Grade 8，medium to lerance sling chains for chain slings

Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade VH
用于提升用途的圆钢短链条 - 用于手动链式葫芦的精细公差提升链 - 等级VH

Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade TH
用于提升用途的圆钢短连杆 - 用于手动链式葫芦的精细公差葫芦链 - TH级

GB/T 30026-2021

起重用钢制短环链手动链式葫芦用高精度链 TH级
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH

BS ISO 16877-2015

Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH
起重用圆钢短链手动链式提升机的精细公差提升链第四级

BS ISO 16872-2015

Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH
起重用圆钢短链手动链式提升机的精细公差提升链 VH级

GB/T 30027-2021

起重用钢制短环链手动链式葫芦用高精度链 VH级
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade VH

UNE-EN 818-2-1996+A1-2008

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
起重用短链节链.安全性.第2部分:链式吊索用中等公差链.8级

UNE-EN 818-3-1999+A1-2008

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
起重用短链节链.安全性.第3部分:链式吊索用中等公差链.4级

Round steel short link chains for lifting purposes — Chain slings of welded construction — Grade 8
起重用圆钢短链.焊接结构的链式吊索.8级

BS ISO 4778-2019

Round steel short link chains for lifting purposes. Chain slings of welded construction. Grade 8
起重用圆钢短链焊接结构的链式吊索八年级

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 (includes Amendment A1:2008)
起重用短链节链.安全性.第3部分:链式吊索用中等公差链.4级；德文版EN 818-3:1999+A1:2008

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统