ISO 4110:1979-新拌混凝土.稠度测定.Vebe试验-国家数字标准馆

废止 ISO 4110:1979

到馆阅读

收藏跟踪

购买正版

Fresh concrete — Determination of the consistency — Vebe test 新拌混凝土.稠度测定.Vebe试验

发布日期： 1979-12-01

规定了通过Vebe试验确定新拌混凝土稠度的方法。该方法被认为对低和易性混凝土特别有用。它不适用于骨料最大尺寸大于40mm的混凝土。描述仪器、程序、结果表达和测试报告。

Specifies a method for determining the consistency of fresh concrete by means of the Vebe test. The method is considered particularly useful for concrete with low workability. It is not suitable for concrete with a maximum size of aggregate greater than 40 mm. Describes apparatus, procedure, expression of results, and test report.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 91.100.30建筑材料 - 混凝土和混凝土制品

关联关系

研制信息

归口单位： ISO/TC 71

相似标准/计划/法规

굳지 않은 콘크리트의 반죽 질기 시험방법(비비 방법)
标准测试方法厘定新拌混凝土的一致性BY VEBE TEST

BS EN 12350-3-2019

Testing fresh concrete-Vebe test
测试新浇混凝土维贝试验

UNE-EN 12350-3-2009

Testing fresh concrete - Part 3: Vebe test
新拌混凝土试验.第3部分:Vebe试验

AS 1012.3.3-1998

Methods of testing concrete, Method 3.3: Determination of properties related to the consistency of concrete - Vebe test
混凝土试验方法方法3.3:测定与混凝土稠度相关的性能-Vebe试验

DETERMINATION OF CONSISTENCE INDEX OF THE FRESH CONCRETE BY THE IRIBARREN METHOD.
用Iribarn法测定新拌混凝土的稠度指数

BS 08/30164884 DC

BS EN 12350-3. Testing fresh concrete. Part 3. Vebe test
BS EN 12350-3 测试新浇混凝土第三部分维贝试验

KS F 2452(2020 Confirm)

굳지 않은 콘크리트의 반죽 질기의 시험방법(다짐도 방법)
标准试验方法测定新拌混凝土的一致性通过评估压实度

BS EN 1015-4-1999

Methods of test for mortar for masonry-Determination of consistence of fresh mortar (by plunger penetration)
圬工用砂浆的试验方法测定新拌砂浆的稠度（通过柱塞渗透）

BS EN 1015-3-1999

Methods of test for mortar for masonry-Determination of consistence of fresh mortar (by flow table)
圬工用砂浆的试验方法新拌砂浆稠度的测定（通过流动表）

AS 1012.3.1-2014

Methods of testing concrete, Method 3.1: Determination of properties related to the consistency of concrete - Slump test
混凝土试验方法方法3.1:混凝土稠度相关性能的测定-坍落度试验

Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)
圬工用砂浆的试验方法.第4部分:新拌砂浆稠度的测定（通过柱塞渗透）；德文版EN 1015-4:1998

UNE-EN 1015-4-1999

METHODS OF TEST FOR MORTAR FOR MASONRY - PART 4: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY PLUNGER PENETRATION)
圬工用砂浆的试验方法.第4部分:新拌砂浆稠度的测定（通过柱塞渗透法）

UNE-EN 1015-3-2000

METHODS OF TEST FOR MORTAR FOR MASONRY. PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE)
圬工用砂浆的试验方法第3部分:新拌砂浆稠度的测定（通过流动表）

AS 1012.3.2-1998

Methods of testing concrete, Method 3.2: Determination of properties related to the consistency of concrete - Compacting factor test
混凝土试验方法方法3.2:与混凝土稠度相关的性能测定-压实系数试验

AS 1012.3.4-1998

Methods of testing concrete, Method 3.4: Determination of properties related to the consistency of concrete - Compactibility index
混凝土试验方法方法3.4:与混凝土稠度相关的性能测定-压实度指数

BS 1881-129-2011

Testing concrete-Method for determination of density of partially compacted semi-dry fresh concrete
测试混凝土

AS 1012.3.5-2015

Methods of testing concrete, Method 3.5: Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test
混凝土试验方法方法3.5:混凝土稠度相关性能的测定-坍落度流动 T500和J形环试验

ASTM C1170/C1170M-20

Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
使用振动台确定辊式压实混凝土的一致性和密度的标准测试方法

AS 1012.18-1996

Methods of testing concrete, Method 18: Determination of setting time of fresh concrete, mortar and grout by penetration resistance
混凝土试验方法方法18:通过抗渗透性测定新拌混凝土、砂浆和灌浆的凝结时间

Standard Test Method for Determination of Slurry Flow Rate of Fresh Glass Fiber Reinforced Concrete
新拌玻璃纤维增强混凝土泥浆流速测定的标准试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统