首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 AS 1012.3.1:2014
到馆提醒
收藏跟踪
购买正版
Methods of testing concrete, Method 3.1: Determination of properties related to the consistency of concrete - Slump test 混凝土试验方法 方法3.1:混凝土稠度相关性能的测定-坍落度试验
发布日期: 2014-03-27
本标准规定了骨料标称尺寸不超过40 mm时,确定混凝土坍落度的方法。
​This Standard sets out the method for determining the slump of concrete, when the nominal size of aggregate does not exceed 40 mm.
分类信息
发布单位或类别: 澳大利亚-澳大利亚标准
关联关系
研制信息
相似标准/计划/法规
现行
AS 1012.3.3-1998
Methods of testing concrete, Method 3.3: Determination of properties related to the consistency of concrete - Vebe test
混凝土试验方法 方法3.3:测定与混凝土稠度相关的性能-Vebe试验
1998-09-05
现行
AS 1012.3.2-1998
Methods of testing concrete, Method 3.2: Determination of properties related to the consistency of concrete - Compacting factor test
混凝土试验方法 方法3.2:与混凝土稠度相关的性能测定-压实系数试验
1998-09-05
现行
AS 1012.3.4-1998
Methods of testing concrete, Method 3.4: Determination of properties related to the consistency of concrete - Compactibility index
混凝土试验方法 方法3.4:与混凝土稠度相关的性能测定-压实度指数
1998-09-05
现行
AS 1012.3.5-2015
Methods of testing concrete, Method 3.5: Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test
混凝土试验方法 方法3.5:混凝土稠度相关性能的测定-坍落度流动 T500和J形环试验
2015-03-05
现行
BS ISO 20290-2-2019
Aggregates for concrete. Test methods for mechanical and physical properties-Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test)
混凝土骨料 机械和物理性能的试验方法
2019-11-27
现行
ISO 24684-2-2023
Aggregates for concrete — Test methods for chemical properties — Part 2: Determination of soluble sulfate salts
混凝土集料.化学财产的试验方法.第2部分:可溶性硫酸盐的测定
2023-01-10
现行
ISO 20290-5-2023
Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method
混凝土骨料.机械和物理财产的试验方法.第5部分:用筛分法测定粒度分布
2023-02-03
现行
ISO 20290-2-2019
Aggregates for concrete — Test methods for mechanical and physical properties — Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test)
混凝土用集料机械和物理性能试验方法第2部分:用洛杉矶试验(LA试验)测定抗碎裂性的方法
2019-11-20
现行
BS ISO 20290-3-2019
Aggregates for concrete. Test methods for mechanical and physical properties-Determination of aggregate crushing value (ACV)
混凝土骨料 机械和物理性能的试验方法
2019-12-12
现行
ISO 20290-3-2019
Aggregates for concrete — Test methods for mechanical and physical properties — Part 3: Determination of aggregate crushing value (ACV)
混凝土用集料机械和物理性能试验方法第3部分:集料压碎值的测定
2019-11-26
现行
ISO 20290-4-2019
Aggregates for concrete — Test methods for mechanical and physical properties — Part 4: Determination of ten percent fines value (TFV)
混凝土用集料机械和物理性能试验方法第4部分:10%细料值的测定
2019-11-20
现行
BS ISO 20290-1-2021
Aggregates for concrete. Test methods for mechanical and physical properties-Determination of bulk density, particle density, particle mass-per-volume and water absorption
混凝土骨料 机械和物理性能的试验方法
2021-11-23
现行
ISO 20290-1-2021
Aggregates for concrete — Test methods for mechanical and physical properties — Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
混凝土用骨料机械和物理性能试验方法第1部分:体积密度、颗粒密度、每体积颗粒质量和吸水率的测定
2021-11-02