本文件规定了必要的尺寸，以允许安装等级为 一、 二、三和六。 这些尺寸反映了设备的要求。 本文件适用于所有新电梯安装，不考虑驱动系统，包括轿厢 带有一个入口，将安装在新建筑中。但是，对于在 在侧面，可以采用直通式入口配置。如果相关，本文件也适用 安装在现有建筑中。 本文件不适用于额定速度大于6.0 m/s的电梯。交叉引用:ISO 4190-2ISO 3ISO 4190-5ISO 8100-1ISO 7000ISO 8100-2购买本文件时提供的所有现行修订版均包含在购买本文件中。

This document specifies the necessary dimensions to permit the installation of passenger lifts of class I, II, III and VI. These dimensions reflect the requirements for the apparatus. This document is applicable to all new lift installations, irrespective of drive systems, including a car with one entrance, to be installed in a new building. However, for arrangements with counterweight at the side, a through-entrance configuration is possible. Where relevant, this document is also applicable to an installation in an existing building. This document is not applicable to lifts of rated speed greater than 6,0 m/s.Cross References:ISO 4190-2ISO 3ISO 4190-5ISO 8100-1ISO 7000ISO 8100-2All current amendments available at time of purchase are included with the purchase of this document.