BS ISO 6162-2:2018给出了法兰头、对开法兰卡箍（FCS）的通用和尺寸规范 和FCSM）、一体式法兰卡箍（FC和FCM）、适用于四螺钉的端口和安装面， 分体式和一体式法兰卡箍式管接头和软管配件，压力为 42兆帕（420巴）。它还规定了要使用的密封件的尺寸，以及所需的凹槽 把海豹关起来。本文件还确认需要容纳公制螺钉紧固件（1型）（适用于DN 13至 DN 76），以及提供一种使用现有英制螺钉紧固件（类型2）（适用于DN 13至DN 51）的方法。这些接头适用于工业和商业领域的液压系统 需要避免使用螺纹接头的产品。交叉引用:ISO 3601-3ISO 263ISO 9227ISO 3601-1ISO 898-1ISO 724ISO 48ASTM A574ISO 725ISO 2768-1SAE J429ISO 5598ISO 4017ISO 19879ANSI/ASME B18。3ISO 261ISO 4762ISO 7089ISO 1302ISO 68-2ISO 68-1SAE J515ISO 6164ISO 13715ISO 6892ISO 5864ISO 6708ANSI/ASME B18。22.1ISO 12151-3ISO 1101ISO 80000-1ISO 10763ISO 273购买时可用的所有现行修订版均包含在本文件的购买中。

BS ISO 6162-2:2018 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to fourscrew, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar1)). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.This document also recognizes the need to accommodate metric screw fasteners (type 1) (for DN 13 to DN 76), as well as to provide a means to use existing inch screw fasteners (type 2) (for DN 13 to DN 51).These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.Cross References:ISO 3601-3ISO 263ISO 9227ISO 3601-1ISO 898-1ISO 724ISO 48ASTM A574ISO 725ISO 2768-1SAE J429ISO 5598ISO 4017ISO 19879ANSI/ASME B18.3ISO 261ISO 4762ISO 7089ISO 1302ISO 68-2ISO 68-1SAE J515ISO 6164ISO 13715ISO 6892ISO 5864ISO 6708ANSI/ASME B18.22.1ISO 12151-3ISO 1101ISO 80000-1ISO 10763ISO 273All current amendments available at time of purchase are included with the purchase of this document.