首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 6164:2018
到馆阅读
收藏跟踪
购买正版
Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 液压传动.在压力为42mpa DN 25至80时使用的四个螺钉 整体式方形法兰连接
发布日期: 2018-05-29
本文件给出了适用于在42 MPa【420 bar【1】】压力下使用的四螺钉一体式方形法兰夹式管接头和软管接头的法兰头、法兰夹、端口和安装表面的一般和尺寸规范。它还规定了要使用的密封件的尺寸,以及容纳密封件的凹槽。 这些连接旨在应用于工业和商业产品上的液压系统中,其中期望避免使用螺纹连接器。 [1]1巴=0.1 MPa=105巴;1Pa=1N/m2。
This document gives general and dimensional specifications for flanged heads, flange clamps, ports and mounting surfaces applicable to four-screw, one-piece square flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa [420 bar[1]]. It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals. These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors. [1] 1 bar = 0,1 MPa = 105 Pa; 1 Pa = 1 N/m2.
分类信息
关联关系
研制信息
归口单位: ISO/TC 131/SC 4
相似标准/计划/法规
现行
BS ISO 6164-2018
Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
液压传动 压力为42 MPa、DN 25至80的四螺钉一体式方形法兰连接件
2018-06-01
现行
KS B ISO 6162-2(2019 Confirm)
유압 유체 동력-스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기-제2부:35 MPa∼40 MPa, DN 13∼DN 51의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第2部分:压力35MPa至40MPa DN13至DN51的法兰连接器
2004-12-21
现行
BS ISO 6162-2-2018
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接
2018-03-02
现行
ISO 6162-2-2018
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动.带分体式或整体式法兰夹和米制或英寸螺钉的法兰连接件.第2部分:压力为42mpa(420bar) DN 13至DN 76的法兰连接件 端口和安装面
2018-02-22
现行
KS B ISO 6162-1(2019 Confirm)
유압 유체 동력-스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기-제1부:3.5 MPa∼35 MPa, DN13∼DN127의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第1部分:压力为3.5MPa至35MPa DN13至DN127的法兰连接器
2004-12-21
现行
BS ISO 6162-1-2012
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接
2012-12-31
现行
ISO 6162-1-2012
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压流体动力——带分体式或一体式法兰夹和公制或英制螺钉的法兰连接件第1部分:压力为3.5 MPa(35 bar)至35 MPa(350 bar)、DN 13至DN 127的法兰接头、端口和安装面
2012-12-14
现行
DIN ISO 6162-2
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa(350)至40MPa(400巴)、DN 13至DN 51压力下使用的法兰连接器(ISO 6162-2-2002)
2006-02-01
现行
DIN ISO 6162-2-DRAFT
Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa(350巴)至40MPa(400巴)压力下使用的法兰连接器 DN 13至DN 51(ISO 6162-2-2002)
2004-12-01
现行
DIN ISO 6162-1-DRAFT
Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5 MPa(35巴)至35 MPa(350巴)、DN 13至DN 127压力下使用的法兰连接器(ISO 6162-1-2002)
2004-12-01
现行
DIN ISO 6162-1
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5MPa(35bar)至35MPa(350bar)压力下使用的法兰连接器 DN 13至DN 127(ISO 6162-1-2002+Cor.1-2004)
2006-02-01