ISO 5395-1:2013规定了用于验证内燃机驱动的旋转式割草机和滚筒式割草机安全要求的术语和通用试验方法，包括行人控制（带或不带闷气）和骑乘式（以下简称“割草机”），并配备:金属切割装置和/或；非金属切削是指一个或多个切削元件以枢轴方式安装在一般圆形驱动装置上，这些切削元件依靠离心力实现切削，每个切削元件的动能为10 J或以上。 不适用于:机器人和远程控制割草机、连枷割草机、草地割草机、镰刀杆割草机、牵引式/半悬挂式割草机和灌木清理机；切割指与农用拖拉机结合使用时的总成； 电动和电池驱动的割草机。 请注意，IEC 60335-1和IEC 60335-2-77共同给出了行人控制步行式电动割草机的要求。 ISO 5395-1:2013不适用于本文件出版日期之前制造的割草机。

ISO 5395-1:2013 specifies terminology and common test methods used for verification of safety requirements for combustion engine powered rotary lawnmowers and cylinder lawnmowers including pedestrian-controlled (with or without sulky) and ride-on types (hereafter named "lawnmower"), and equipped with: metallic cutting means and/or; non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more. It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers. Note that IEC 60335-1 together with IEC 60335-2-77, give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers. ISO 5395-1:2013 is not applicable to lawnmowers which are manufactured before the date of publication of this document.