1.1本试验方法涵盖在标准试样上以及在特定制备和测试条件下测试时，测定用于粘接工程塑料的粘合剂的相对劈裂/剥离强度。 1.2以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 本试验方法通过拉伸载荷测定解理剥离中粘合剂的强度特性。它允许对粘结工程热塑性粘附物的解理/剥离强度进行比较测试。 解理/剥离力在粘接组件中很常见。本试验方法提供了基材/粘合剂组合在劈裂/剥离力下的性能信息。

1.1 This test method covers the determination of the comparative cleavage/peel strengths of adhesives for bonding engineering plastics when tested on a standard specimen and under specific conditions of preparation and testing. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== This test method determines strength properties of adhesives in cleavage peel by tension loading. It allows the comparative testing of cleavage/peel strengths of bonded engineering thermoplastic adherends. Cleavage/peel forces are common in bonded assemblies. This test method gives information as to the performance of substrate/adhesive combinations under cleavage/peel forces.