现行

DIN 16284

Nipple connections for pressure gauges and their accessories
压力表及其附件的螺纹接头

2004-07-01

现行

DIN 16287

Caps for test connection on valves and cocks for pressure gauges
阀门上的测试连接盖和压力表旋塞

2004-07-01

现行

DIN 2282-1

GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
几何参数的验证——“GO”螺纹量规件.第1部分:公称直径为1mm至40mm的ISO通用米制螺纹用“GO”车间量规、基准量规和定位量规

2000-01-01

现行

DIN 2284-1

NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
几何参数的验证——“不合格”螺纹量规件.第1部分:公称直径为1mm至40mm的ISO通用公制螺纹用“不合格”车间量规、基准量规和定位量规

2000-01-01

现行

GOST 17767-1972

Ручки ввертные для калибров-пробок и колец. Конструкция и основные размеры
旋塞式手柄用于插头式测量仪和环形测量仪 设计和基本尺寸

现行

DIN 16263

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
PN 16旋塞 带调整螺母、外螺纹接头和压力表测试接头

2004-07-01

现行

DIN 6698

Bulk freight wagons with pressure discharge; guard and support with test connection of pressure gauge
带压力卸料的散装货车；带有压力表测试连接的防护装置和支架

1979-03-01

现行

HB 4271-2004

安装钢丝螺套用内螺纹小径的光滑塞规
Small diameter smooth plug gauge of internal screw for wire thread insert

2004-09-01

现行

DIN 16271

PN 250 and PN 400 valves with test connection for pressure gauges
带压力表测试接头的PN 250和PN 400阀门

2004-07-01

现行

VDI/VDE/DGQ 2618 Sheet 4.8

Inspection of measuring and test equipment - Test instruction for zylindrical screw setting play gauges and screw check plugs
测量和试验设备的检验.zylindrical螺钉固定间隙规和螺钉检查塞的试验说明

2006-04-01

现行

DIN 2284-2

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹量规件-第2部分:“不合格”车间量规 ISO通用米制螺纹公称直径超过40mm至200mm的检查和设置塞规

2001-12-01

现行

DIN 2282-2

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹量规件.第2部分:ISO通用公制螺纹公称直径大于40mm小于200mm的“GO”车间量规、检查和设置量规件

2001-12-01

现行

DIN 16270

PN 250 and PN 400 valves without test connection for pressure gauges
不带压力表测试接头的PN 250和PN 400阀门

2004-07-01

现行

DIN 16261

PN 16 cocks with female/female and female/male connection for pressure gauges
PN 16旋塞 带有压力表的阴/阴和阴/阳连接

2004-07-01

现行

DIN 6697

Bulk freight wagons with pressure discharge; pressure gauge with plate spring, radial bottom flange connection
带压力卸料的散装货车；带板簧、径向底部法兰连接的压力表

1979-03-01

现行

DIN 2284-3

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规

2001-12-01

现行

DIN 3182-3

Respiratory protective devices and diving apparatus - Standard thread - Part 3: Screw plug gauges
呼吸防护装置和潜水器.标准螺纹.第3部分:螺纹塞规

1996-04-01

现行

DIN 2282-3

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规

2001-12-01

现行

DIN 3434

Gas valves for gas installations - Straight pattern conicel plug valves with screw connection - Nozzles with conical connection
气体装置用气阀.带螺纹连接的直型锥形旋塞阀.带锥形连接的喷嘴

2012-06-01

现行

DIN 16262

PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
PN 6和PN 16旋塞 带调整螺母和压力表公接头

2004-07-01