本文件包含仅用于储存陆上车辆运行用压缩氢气的连续生产可再充装容器的材料、设计、制造、标记和测试要求。这些容器 a） 永久性地连接在车辆上， b） 容量高达1000升水容量，以及 c） 标称工作压力不超过70 MPa。 本文件的范围仅限于装有ISO 14687规定的燃料电池级氢气（适用于燃料电池陆地车辆）和ISO 14687规定的A级或更好氢气（适用于内燃机陆地车辆）的燃料容器。 本文件还包含可在轻型车辆、重型车辆和工业动力卡车（如叉车和其他物料搬运车辆）上使用的氢燃料容器的要求。

This document contains requirements for the material, design, manufacture, marking and testing of serially produced, refillable containers intended only for the storage of compressed hydrogen gas for land vehicle operation. These containers a) are permanently attached to the vehicle, b) have a capacity of up to 1 000 l water capacity, and c) have a nominal working pressure that does not exceed 70 MPa. The scope of this document is limited to fuel containers containing fuel cell grade hydrogen according to ISO 14687 for fuel cell land vehicles and Grade A or better hydrogen as per ISO 14687 for internal combustion engine land vehicles. This document also contains requirements for hydrogen fuel containers acceptable for use on-board light duty vehicles, heavy duty vehicles and industrial powered trucks such as forklifts and other material handling vehicles.