现行

CB/T 3747-2013

船用铝合金焊接接头质量要求

2013-12-31

现行

KS R 9205

철도 차량용 알루미늄 합금 용접 이음 — 설계 방법
铁路车辆用铝合金焊接接头.设计方法

2022-10-28

现行

KS R 9205(2016 Confirm)

철도 차량용 알루미늄 합금 용접 이음 - 설계 방법
铁路车辆用铝合金焊接接头设计方法

2006-06-02

现行

JIS E 4050-1992

Welded joints of aluminium alloy for railway rolling stock -- Design methods
铁路车辆用铝合金焊接接头设计方法

现行

GOST R 59849-2021

Соединения сварные конструкций кузовов железнодорожного подвижного состава из алюминиевых сплавов. Требования к проектированию, изготовлению, ремонту и контролю качества
铝合金铁路车体的焊接接头 设计、制造、维修和质量控制要求

现行

CB/Z 258-2013

船用铝合金焊接工艺要求

2013-12-31

现行

GB/T 22085.2-2008

电子束及激光焊接接头 缺欠质量分级指南 第2部分：铝及铝合金
Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2:Aluminium and its weldable alloys

2008-06-26

现行

BS EN 14532-3-2004

Welding consumables. Test methods and quality requirements-Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 铝合金焊接用焊丝、焊丝和焊条的合格评定

2005-01-13

现行

KS B ISO 13919-1

전자 빔과 레이저 빔 용접 이음부 — 불완전부의 품질등급에 대한 요건과 권고사항 — 제1부: 강, 니켈, 타이타늄 및 그 합금
电子束和激光束焊接接头缺陷质量等级的要求和建议第1部分:钢、镍、钛及其合金

2023-11-10

现行

EN ISO 13919-1-2019

Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019)
电子束和激光束焊接接头缺陷质量等级的要求和建议第1部分:钢、镍、钛及其合金

2019-11-20

现行

ISO 13919-1-2019

Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys
电子束和激光束焊接接头.缺陷质量等级的要求和建议.第1部分:钢、镍、钛及其合金

2019-10-25

现行

UNE-EN 14532-3-2006

Welding consumables. Test methods and quality requirements. Part 3: Conformity assesment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 第3部分:铝合金焊接用焊丝、焊丝和焊条的合格评定

2006-03-29

现行

KS B ISO 13919-2

전자 빔과 레이저 빔 용접 이음부 — 불완전부의 품질등급에 대한 요건과 권고사항 — 제2부: 알루미늄, 마그네슘 및 그 합금과 구리
电子束和激光束焊接接头缺陷质量等级的要求和建议第2部分:铝、镁及其合金和纯铜

2023-11-10

现行

ISO 13919-2-2021

Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper
电子束和激光束焊接接头.缺陷质量等级的要求和建议.第2部分:铝、镁及其合金和纯铜

2021-01-26

现行

EN ISO 13919-2-2021

Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 2: Aluminium, magnesium and their alloys and pure copper (ISO 13919-2:2021)
电子束和激光束焊接接头缺陷质量等级的要求和建议第2部分:铝、镁及其合金和纯铜

2021-02-17

现行

DIN EN 14532-3

Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材.试验方法和质量要求.第3部分:铝合金焊接用焊丝、焊丝和焊条的合格评定；德文版EN 14532-3:2004

2005-02-01